Carburetor number lookup

Carburetor number lookup DEFAULT

The first line, "S2MS-9510-A" represents our O.E. (Ford) number, used for their records/catalog to keep track of which vehicle it would be installed on. While there are resources dedicated to decoding this code, it is unused by Holley when attempting to source a rebuild kit or service part. The second line contains the list number "3259-1". We can use this to look up information like jetting, proper rebuild kit, available replacement parts and more. There are multiple books dedicated to researching Holley carburetors (including Holley's own #36-51-7 Illustrated Manual) but for those seeking a quick resource, check out their Master List found HERE.

The Master List shows that this carburetor is rated at 725 CFM and was initially built with a 68 primary jet and 78 secondary jet along with an 8.5" power valve. Due to the unique nature of this carburetor, there are no off-the-shelf to rebuild kits available. It would be best to speak with one of Holley's Technical Service Representatives at 1-888-258-3835 for their recommendation on what would work best.

Moving on, 0798 is our date code; Holley used a three digit up to 1973, after which they moved to the four digit code you see here. Decoding them is as follows:

  • Three Digit - Example 763 > 7 - Year (1967) , 6 - Month (June) , 3 - (Third Week)
  • Four Digit - Example 0798 > 079- Day of Year (would land in March) , 8 - 1978/1988/1998/2008

When searching for used carburetors, note that three-digit date codes are pre-1973. Service carburetors (dealer replacements) will also be stamped with a four-digit code similar to post-1973 units, the carburetor shown above was a service unit produced in 1978.



Hopefully this guide shares a little insight onto how Holley carburetors are identified, as always you can contact our Technical Service department at the toll free number above. If you are interested in checking out the local swap meet or garage sale, see below for a list of commonly sought after carburetors for restoration projects.


Sours: https://www.holley.com/blog/post/holley_carb_hunter_s_guide/

Holley Carb Number Lookup

Listing Results Holley Carb Number Lookup

Holley Carburetor Numerical Listing

7 hours agoCarb Number Carb Model Number CFM Renew Kit. Trick Kit: Needle & Seat Primary Main Jet Secondary Main Jet or plate Primary Metering Block Secondary Metering Block Power Valve Pump Nozzle Size, Primary Secondary Nozzle Size or Spring Color Primary Bowl Gasket Primary Metering Block Gasket Secondary Bowl Gasket Secondary

Read more

See Also: Holley carburetor rebuild kits by list number  Show details

Holley Company Information

(866) 464-6553

7 hours ago Off Road Carburetors. Shifters and Handles. Spare Tire Spacer. Transmissions. XDR Off Road. View All. Holley Tech Services Phone Numbers. Bowling Green, KY- (866) 464-6553. Join the Holley Family. Stay up to date with the latest releases, events, promotions and more. Sign Up.

Read more

See Also: Holley carb specs by list numberVerify It   Show details

How to Identify Your Holley or Demon Carburetor …

1 hours ago It's like a "VIN" for your carburetor and should be hand-stamped on the front of the choke tower to the right of the vent tube on most typical Holley carbs. The list number typically is four to six digits long and may or may not have a suffix number behind it. The date code will be right below it.

Read more

See Also: Holley carburetors numbers master list  Show details

Tech Support Holley Performance

1 hours ago The list number for most performance and factory 2 and 4 barrel carburetors will be found stamped into the upper right hand corner of the airhorn or sometimes called the choke tower. On the 4150 HP models that do not have a choke tower the list number will be stamped into …

Read more

See Also: Support Number, Tech Support  Show details

Holley Carburetor Numerical Index

6 hours ago301 rows · Holley carburetor numbers. The numbers below are stamped Holley List numbers. A …

Read more

See Also: Phone Number  Show details

OEM Specific Carburetor Number

8 hours agoCarburetor Number (Example Quad 7028207 Holley R3418A = R3418 - Ford C5ZF-9510-C = C5ZF-C ) Lookup By Vehicle Aftermarket Holley Check here (This is provided as a FREE service from Carbs Unlimited reference only , Please verify carb information from other sources) Current Years in Database 1967- 75 Chev - 62-71 Corvette - 64-70 GTO - 68-69

Read more

See Also: Databases  Show details

Holley Carb Identification

904 1908 1909

7 hours agoHolley Carb Identification: Holley 1904 1908 1909 1920 1960 1940 1945 AA AA-1 2100 2209 2210 2300 5200 4000 4150 4160 4180 4165 4175 : Holley 1909 Parts Page Diagram: 1904: 1908: Carbs Unlimited 253-833-4106 . E-Mail [email protected]carbs.net. This Site Designed By

Read more

See Also: Phone NumberVerify It   Show details

Holley Help Center

(877) 712-0002

8 hours ago If you need additional assistance that is not order related or of a technical nature please contact Holley at (877) 712-0002 or email [email protected] Tech Assistance To better assist you with technical inquiries, Holley has three teams of technicians at your disposal.

Read more

See Also: Customer Service, Contact SupportVerify It   Show details

How do I identify my Holley carburetor?

4 hours ago It's a Holley. On the air horn the top number is 3885067-EE, the next line is List 3246, and the next is 3682. I get the List number, but what are the other numbers and is there a way to tell what car this carb is from? It's in really good shape. Thank you. I also have an 6R 6931 B, no air horn.

Read more

See Also: Phone Number  Show details

Holley Carburetor Numerical Index

1 hours agoNumbers that are preceded by '6R' or other combinations of numbers and the letter 'R' are casting numbers referring to a particular part of the carburetor and cannot be used to identify the carburetor. click on a link below for kits, floats and other parts listed by carburetor number. Holley List Numbers. R-120 to R-1098; R-1125 to R-1847; R

Read more

See Also: Phone Number  Show details

Holley Carburetor Numerical Listings Technical Information

Just NowHolley Carburetor Numerical Listings Carb. Primary & Primary Secondary Primary Secondary Primary Carburetor Model CFM Renew Trick Secondary Main Main Jet Metering Metering Primary Discharge Part No. No. Kit Kit Needle Jet or Plate Block Block Power Valve Nozzle & Seat Size 0-1848-1 4160 465 37-119 37-933 6-506 122-57 N/S N/S 34R9716-3 125-85 .025

Read more

See Also: Technical Support, Tech Support  Show details

Identify carburetors by the carb number

4 hours ago Or phone during business hours. 1 Holley carburetor 4bl. 2 Motorcraft 2bl carburetor. 3 Motorcraft 1bl carburetor . 4 Rochester carburetor 4bl . 5 Holley carburetor 1904 number . 6 Carter carburetor AFB number. 7 Rochester carburetor 1bl number. 8 Carter YFcarburetor number . 9 Dual jet 2bl rochrester carburetor. 10 Holley Carburetor

Read more

See Also: Phone Number, Business  Show details

Holley Carb Hunter's Guide Holley Motor Life

888-258-3835

Just Now It would be best to speak with one of Holley's Technical Service Representatives at 1-888-258-3835 for their recommendation on what would work best. Moving on, 0798 is our date code; Holley used a three digit up to 1973, after which they moved to the four digit code you see here. Decoding them is …

Read more

See Also: Technical Support, Tech SupportVerify It   Show details

Holley Customer Service Phone Number (866) 4646553, Email

5 hours ago Summary . Holley is a manufacturing company offering carburetors, manifolds, superchargers, water pumps, and throttle body fuel injection as well as and fuel pumps of high performance for race and street use. Using the recent technology, Holly produces high quality parts and accessories. Holley's manufacturing departments differ and cover variety of works ranging from small drilling and

Read more

See Also: Phone Number, Customer Service  Show details

Holley carb numbers NastyZ28.com

6 hours ago Aug 11, 2005. Location: Aylmer, Ontario, Can. I just picked up a box of Camaro stuff and in the box was a holley carb. The only numbers on the flange is LIST-4118-8or9 and below that is 0766. I know its a 4150 carb and 725 cfm. but thats it. Can anyone tell me whats it off of, I think it might be a service replacement for something but what.

Read more

See Also: Phone Number  Show details

Holley Carburetor Identification Carburetor kits, parts

888-664-6462

1 hours ago Please contact us by email or call 888-664-6462 toll free if you have any questions. Notable Holley carbs include the Holley 2100, also known as the '94' or AA-1, introduced on the '34 Ford and variously marked as a Holley or with a Ford script. This one served on flathead V8's for many years, as well as on early Y-blocks as the 2110 version.

Read more

See Also: Contact Support, Contact UsVerify It   Show details

Holley Carburetor Numbers Carburetor kits, parts and manuals

6 hours agoHolley carburetor numbers. The numbers below are stamped Holley List numbers. A guide to locating these number is here.

Read more

See Also: Phone Number  Show details

Help me identify these Holley carbs! The H.A.M.B.

7 hours ago The numbers on the Mopar carb are: a sideways "B" and 4405 1 1541, 384663 C91. The glass bowl carb numbers are: 117787-R91, LIST 758. The carb with the water heater spacer has the following numbers: C19E 9510-A, LIST 2244. I think they say "LIST" as they're really hard to read.

Read more

See Also: Dewa Contact Number  Show details

Carb numbers Holley Performance Products Forums

7 hours ago I bought a 4 barrel holley carb and trying to find out what size it is, the number on the horn is 9776 and I can't find any reference to this number. I have also found on the carb numbers 2341 and 2241, can anyone help me?

Read more

See Also: Phone Number  Show details

Holley Carburetor Free Technical

2 hours agoHolley 1901 2 Barrel; Holley 852 Technical; Holley 1904 Technical; Holley 1909 Technical; Holley 1920 Technical Help; Holey 1931 Technical; Holley 1946; Holley 1970 Technical; Holley 2210, 2211, 2245 Technical; Holley 2280 Technical; Holley 2300 Technical; Holley 4000 Technical; Holley 4150 4160 Technical; Holley 4165 Carburetor; Holley 5200

Read more

See Also: Technical Support, Tech Support  Show details

HOLLEY CARB INFORMATION classiccoachupdate.com

1 hours agoHOLLEY CARB INFORMATION. HOLLEY 4 BARREL CARB LIST NUMBERS AND STOCK JETTING. One of the things we noticed over the years is the lack of information concerning Holley List #'s and the specifications for individual carbs and their stock jetting. Many folks buy a used carb at a swap meet or from an ad and find out that it wasn't what they thought

Read more

See Also: Phone Number  Show details

Holley carb i.d. by number The H.A.M.B.

7 hours ago The original 3310 was a 780. When holley came out with the updated version 3310-1 it was now a 750cfm carb. same goes for all 3310- numbered carbs. Only the 3310 was a 780. These carbs are dual feed, not bouble pumpers. Edit, There were …

Read more

See Also: Phone Number  Show details

Technical Holley ID numbers The H.A.M.B.

Just Now This whole search started when I tried to identify a Holley 2300 2V carb sporting a LIST - 8641. I can tell by some of it's features that it was an OEM carb on something, just trying to positively identify it. It's got a 1342 date code so I'm guessing it's the 134th day of 1962 or 1972. If anybody has a link to the 2300 LIST numbers index I'd

Read more

See Also: Technical Support, Tech Support  Show details

Carb Decode

5 hours agoHolley Their modular design, inclorporating a metering block for the jets and power vales, made it easy for anyone to rebuild their carburetor. The air horn of the carb will be stamped with several numbers, including the Holley list number, the Chevrolet part number, and usually a …

Read more

See Also: Phone Number  Show details

Holley Carb Identification CorrectCraftFan.com Forums

270 781-9741

Just Now The LIST number is how Holley identifies the model. I believe that the LIST-7128 is a marine 600cfm 4160, but call their tech line is you want confirmation: 270 781-9741 If that turns out to be the case, that carb is commonly found on Ford 351w's.

Read more

See Also: Tech SupportVerify It   Show details

Holley Carb Where is Mod Number Chevy Nova Forum

8 hours ago The Holley spreadbore carb is a poor imitation of the Rochester Quadrajet. Here's why. The Rochester Quadrajet is a modern design, and uses some very forward-thinking features such as a central float bowl with one float, vacuum-operated metering rods for power enrichment, an air-door controlled secondary, and no gaskets below fuel level.

Read more

See Also: Gas Station  Show details

Can someone identify this Holley carburetor (pics) Team

7 hours ago Look for a number that says "LIST XXXX". This number is usually located on the choke horn, driver's side. For example, LIST 3310. Once you post the list number, someone will be able to ID the carb for you. I'm not a Holley expert, but it's obviously a vac secondary 4V of some sort. T.

Read more

See Also: Phone Number  Show details

Holley Carburetor Parts

9 hours ago The Holley 847 is a 1 barrel downdraft carburetor. Many of the parts for the 847 also fit the Holley 94. The Holley 847 carburetor was used on 1941-51 Ford car and 1941-41 Ford Truck 6 cylinder. Holley 847 carburetor parts including carburetor kits and sometimes used hard to find parts.

Read more

See Also: Phone Number  Show details

Ford and Mustang holley 4150 carburetors

6 hours ago Ford and Mustang Holley 4150 carburetor. Holley casting numbers decode and identification. Correct list numbers and correct date codes for all holley carburetors. FORD and MUSTANG Holley 4150 Carburetors C3AE-B list 2668 427, C3AF-BE list 3255 65 Ford Full Size 427, C3AF-BV list 3255-1 66 - 67 Ford Full Size 427, C5AF-BV list 3255-1 66 - 67

Read more

See Also: Phone Number  Show details

Holley carb Numbers? Mercury Cougar Owners

4 hours ago The raised cast number P-46 tells me you have a list # 4780 800 cfm. The list number was milled off with the choketower. Your throttleplates should have a 172 or 173 stamping. Jeff Seem like he could be correct the plates are 172, The guy I got the carb from said he thought it …

Read more

See Also: Keto Customer Service Telephone Number  Show details

Holley tech number busy, need SD card contents.

2 hours agoHolley tech number busy, need SD card contents. Been trying to reach Holley tech on the phone for weeks. They seem very busy indeed. I'm trying to get the V5 contents for the SD card in the the 3.5" handheld that I need now that I've upgraded the ECU.

Read more

See Also: Phone Number, Tech Support  Show details

How to Identify Holley Carburetors It Still Runs

4 hours ago Step 2. Locate the Holley model number. After determining the carburetor is a Holley, look for the code numbers, usually located on the side of the air horn. The Holley model number is present along with the auto maker part number, if factory-issued, a date and application code. Locate the lone four-digit code.

Read more

See Also: Phone Number  Show details

Holley date codes NastyZ28.com

270-781-9741

4 hours ago He also says he agrees, it's most likely a 1964 carb. ph. 270-781-9741. Now I'm gonna obsess on finding what they came on.. lol. additional info for that carb.. assuming it is unmolested. all numbers are Holley numbers. renew kit = 37-1537. trick kit = 37-933. needle and seat = 6-508. primary main jet = 122-76.

Read more

See Also: Phone NumberVerify It   Show details

Holley How To Identify Your Carburetor Facebook

Just Now Are you looking for a rebuild kit, parts, or specifications for your carburetor? If so, the first thing you'll need is the list number! Watch below to see how to find this number and what to do with it!

Read more

See Also: Phone Number  Show details

Holley carb numbers SoCal Jet Boats

8 hours ago Re: Holley carb numbers « Reply #11 on: February 27, 2011, 07:41:11 PM » I'm running some trick out reworked 660 center squirter that bench flowed just under 800 cfm Dave at fuel curve west did the build and work great since day one.

Read more

See Also: Phone Number  Show details

Holley Parts Page CARBS UNLIMITED INC. carburetors

8 hours agoHolley. Brand. Power Valves. Each Holley power valve is stamped with a number to indicate its vacuum opening point. For example, the number "65" indicates that the valve will open when engine vacuum drops to 6.5 in. Hg or below. "75" indicates 7.5 in. Hg, "85" indicates 8.5 in. Hg, etc. 10.99ea.

Read more

See Also: Phone Number  Show details

Holley carb i.d. by number Page 2 The H.A.M.B.

3 hours ago i have a holley book and can look it up if you give the number. should be on the front driver's side of the choke, if you don't already know. it's usually a hyphenated 5 or 6 digit number; for example, the carb on my car is 7002-1.

Read more

See Also: Phone Number  Show details

How Do You Read the Model Number of a Holley Carburetors?

Just Now Determine the model number of a Holley carburetor by locating its list number. This number is stamped on the carburetor and is preceeded by a letter. Look for the list number on the main body casting and choke air horn. The number is stamped into the metal in one of these locations. Write down the set of numbers that begins with a letter.

Read more

See Also: Phone Number  Show details

Complete History of the Holley Carburetor • Muscle Car DIY

1 hours ago All Holley carbs can be easily identified; simply use the part number stamped on the carb and search the database on Holley’s website. Carburetors such as the Dominator 4500 series do not have a choke housing, and as a result, the part number and date code are located on the side of the main throttle body.

Read more

See Also: Databases  Show details

Decoding holley carb I.D numbers NastyZ28.com

7 hours ago i've got (2) holley 1850 600 carbs andtrying to figure out the stamp #'s on the air horn. carb #1. 1850-1. 3535. carb #2. 1850. 5782825. 922. the only thing i can figure out on carb #2 the number 922 is 2nd week febuary 1969. this carb also has a equalizer tube between both bowls.on carb #1 the four digit code #3535 is a over the counter item.

Read more

See Also: Phone Number  Show details

Holley carb i.d. by number Page 3 The H.A.M.B.

3 hours ago Hi, I have a dual line Holley I removed from my 48, with vacuum secondary's and can't find the numbers anywhere in the links that's listed. Does anyone have a clue to these: R84010-3 and under that is 3386 I'm getting ready to sell it on ebay, don't want to through it away, and would like to describe it accurately.

Read more

See Also: Phone Number  Show details

Identify my Holley. Team Camaro Tech

8 hours ago The diameter of the bores are the same for all 4 of them. 1.680. The Devil's advocate said: Look on the top of the metering blocks, Holley sometimes stamped the LIST number on them, like L-4777, or L-4777-2, etc. Long shot, but the info might be there. Regards, Milton.

Read more

See Also: Tech Support  Show details

Need help with holley 4118S Vintage Mustang Forums

5 hours ago 4118-s Holley Ok. this is a old post but i have to say this. the 4118 -s is a OE replacement for a 68 gt500. it's a 725 dual feed carb. they did come with vacuum secondaries. Holley will verify this if you don't believe it. I actually talked to a tech on the phone, didn't use the website. That carburetor is getting very hard to find.

Read more

See Also: Phone Number, Tech Support  Show details

Everett Holley Phone, Address, Background info Whitepages

6 hours ago The best result we found for your search is Everett Dean Holley age 50s in Tyler, TX in the The Cumberland Estates neighborhood. They have also lived in Bridge City, TX and Whitehouse, TX. Everett is related to Lauren Hass and Nancy M Golley as well as 3 additional people. Select this result to view Everett Dean Holley's phone number, address, and more.

Read more

See Also: Phone Number  Show details

Holley 4Barrel Carburetors Camaro, Chevelle, Chevrolet

7 hours agoHolley 4-Barrel Carburetors - Camaro, Chevelle, Chevrolet, Corvette, Chevy II / Nova. 1964-67 Holley Components - 4160 Series (Single Fuel Inlet 585 CFM 275 to 390 HP) 1965-72 Holley Components - 4150 Series (Dual Fuel Inlet 780-855 CFM 375 to 450 HP) Emmissions Bowl System. B3881. 64-67.

Read more

See Also: Phone Number  Show details

All Time (45 Results)Past 24 HoursPast WeekPast month

Please leave your comments here:

New Contact Listing

Frequently Asked Questions

Where are holley carburetor id numbers located?

Locate the Holley model number. After determining the carburetor is a Holley, look for the code numbers, usually located on the side of the air horn. The Holley model number is present along with the auto maker part number, if factory-issued, a date and application code. Locate the lone four-digit code.

What is a holley double pumper carb?

I see a lot of people running 650cfm Holley Double Pumpers around here... A double pumper carb is simply a mechanical secondary carb that has two accellerator pumps, one for the primary and another for the secondarys. And your running an auto, so set the rear pump lever gap slightly larger than the front.

What is a six pack carburetor?

A six pack usually refers to the Chrysler (Mopar) carburetor setup which is three-two barrel carbs on an intake.

Sours: https://www.webcontactus.com/holley-carb-number-lookup/
  1. 2018 ford explorer kbb
  2. On the surface lyrics
  3. Demon spongebob
  4. Wic iowa

Carburetor Number Lookup

Listing Results Carburetor Number Lookup

OEM Specific Carburetor Number

8 hours agoCarburetor Number (Example Quad 7028207 Holley R3418A = R3418 - Ford C5ZF-9510-C = C5ZF-C ) Lookup By Vehicle Aftermarket Holley Check here (This is provided as a FREE service from Carbs Unlimited reference only , Please verify carb information from other sources) Current Years in Database 1967- 75 Chev - 62-71 Corvette - 64-70 GTO - 68-69

Read more

See Also: Ford carburetor identification numbers  Show details

Identify carburetors by the carb number

4 hours ago Or phone during business hours. Or email or fax. Tell us clearly what you need. All inquiries receive personal attention by our experts, and we always respond, by phone or email, as fast as we can. 7 Rochester carburetor 1bl number. 8 Carter YFcarburetor number . 9 Dual jet 2bl rochrester carburetor. 10 Holley Carburetor Linkage :

Read more

See Also: 1967 corvette carburetor numbers  Show details

Holley Carburetor Numerical Index

1 hours agoNumbers that are preceded by '6R' or other combinations of numbers and the letter 'R' are casting numbers referring to a particular part of the carburetor and cannot be used to identify the carburetor. click on a link below for kits, floats and other parts listed by carburetor number. Holley List Numbers. R-120 to R-1098; R-1125 to R-1847; R

Read more

See Also: Holley carburetor part numbers  Show details

7705363366 Dollar Carburetor & Electric Phone Number

770-536-33662 hours ago Get more information on Dollar Carburetor & Electric by viewing our in-depth profile. Check it out Today! Advanced Search: By Name. X Log In Sign Up. Phone lookup Phone lookup +1. Phone Number. Become a Member to Edit this Listing Search Any Phone Number Get Name Address Photos And More! ()-Search. Common variations. 7705363366; 770-536

Read more

See Also: Carb number lookupVerify It   Show details

Welcome to National Carburetors King of Carburetors

2 hours ago Welcome to NationalCarburetors.Com, one of the largest suppliers of carburetors in the USA! You can trust us to do the job right. We have rebuilt hundreds of thousands of carburetors since 1954. We carry carburetors for: American cars and trucks, import cars and trucks, antique cars, classic cars, muscle cars, boats, and industrial engines.

Read more

See Also: Gm carburetor numbers  Show details

Carburetor Identification for Small Engines – Randy's

1 hours ago ZAMA. Zama carburetors are slightly more complicated. You're going to be looking for body type and the model number on opposite sides of the body. You'll find the body type on the same side as the jets, usually cast into the center of the housing. In this case, our carburetor has a "C1U" body. For the model number, you'll simply turn it around

Read more

See Also: Carb number database  Show details

Holley Carburetor Numerical Listing

7 hours agoCarb Number Carb Model Number CFM Renew Kit. Trick Kit: Needle & Seat Primary Main Jet Secondary Main Jet or plate Primary Metering Block Secondary Metering Block Power Valve Pump Nozzle Size, Primary Secondary Nozzle Size or Spring Color Primary Bowl Gasket Primary Metering Block Gasket Secondary Bowl Gasket Secondary

Read more

See Also: Carburetor part numbers  Show details

Carburetor Parts Catalog Mike's Carburetor Parts

3 hours ago Part Number [id] (6) $9.00. Add To Cart. Mike's Carburetor Parts is the number one online retailer for all carburetor parts for popular brands. We are passionate about carburetor repairs and we want to share our passion with you. Browse our library of automotive, truck, marine, industrial, and agricultural carburetor parts to find what you need

Read more

See Also: Phone Number  Show details

California White Pages CA Phone Directory Lookup

Just NowPhone Number Phone lookup Phone lookup +1. California White Pages (CA) Find People in California If you are Looking for someone in the state of California, then you have found the right spot. Our Phone book of names, phone numbers and addresses will help you locate anyone, anywhere. We have tapped into the largest databases of information to

Read more

See Also: Phone Number, Databases  Show details

Rebuilt Carburetors Guaranteed Carburetors

4 hours ago We ask for the carb number and vehicle info at the end of the ordering process. Our website has pictures to show the location of the carb number for most vehicle applications. If the rebuilt carburetor you are purchasing does not show a picture, usually a similar model carburetor on that same web page will show the location of the carb number.

Read more

See Also: Phone Number  Show details

Rochester Carburetor Numerical Index

Just Now Rochester carburetor numbers are stamped into the float bowl of the carburetor starting in 1968. Before that, they are found on a tag. Most 1967-down Rochester carbs have a triangular aluminum or brass tag retained by a screw attached to the top of the float bowl. 1965 to 1967 Quadrajets had a round 'bottle cap' tag on the front driver's side.

Read more

See Also: Phone Number  Show details

Parts & Services Walbro

8 hours ago If you know the specific carburetor or carburetor components you need, just follow these easy steps: Go to Walbro Parts Look up; In the box to the upper right hand side where it reads “Search by Walbro Part #” type in the specific part number or model you are looking for. For example WT-XX and click on GO.; You will then see that part number and its list price or …

Read more

See Also: Ads  Show details

Carburetor kits, parts and manuals

888-664-64626 hours agoSearch by the make of vehicle in the Application Catalog below. Look up your carburetor number by the carburetor manufacturer: Carter Ford Holley Marvel-Schebler Rochester Stromberg Zenith. Call us at 1-888-664-6462 or email at [email protected] printed instructions included with kits!

Read more

See Also: Phone NumberVerify It   Show details

Contact Us Mikuni Carburetor

Just Now New TTR125 Carburetor for YAMAHA TTR 125 TTR-125 Carb Carborator 2000-2007 Yamaha TTR125L TTR125E TTR125LE TTR125 October 23, 2020 Venom Brand SeaDoo Mikuni Carburetor Rebuild Kit & Needle Seat & Base Gasket (Compatible With Sea-Doo, Fits 92-96 GTS, 91-96 SP & 93-96 SPI)

Read more

See Also: Contact Support, Contact Us  Show details

How do I identify my Holley carburetor?

4 hours ago Could someone please help me identify this carb. It's a Holley. On the air horn the top number is 3885067-EE, the next line is List 3246, and the next is 3682. I get the List number, but what are the other numbers and is there a way to tell what car this carb is from? It's in really good shape. Thank you. I also have an 6R 6931 B, no air horn.

Read more

See Also: Phone Number  Show details

Carburetors and Parts Jacks Small Engines

5 hours agoCarburetors and Carburetor Parts. Whether your carburetor is for a Briggs and Stratton, John Deere, Nikki, Tillotson, or maybe it's a Tecumseh, Walbro or Zama carburetor, Jack's has the replacement carburetor you need. Maybe your small engine carburetor just needs a repair or an adjustment, Jack's has replacement parts as well.

Read more

See Also: Phone Number  Show details

Contact Us KB Carburetors

7 hours ago Contact Us. We're happy to answer questions or help you with returns. Please fill out the form below if you need assistance. Full Name. Phone Number. Email Address *. Order Number. Company Name. RMA Number.

Read more

See Also: Phone Number, Contact Support  Show details

How to Identify Keihin Carburetors Livestrong.com

9 hours ago Step 2. Look at the carburetor itself. You will find a number that is usually preceded by two to three letters. This is your model number. This number is needed for all parts orders or repair assistance. This number is normally located on the side of the carburetor toward the bottom.

Read more

See Also: Phone Number  Show details

Onan HGJAB Carburetor Parts Lookup Colburnpower.com

3 hours ago Onan HGJAB Carburetor Parts Lookup. The carb for the Onan gasoline generator models 5.5HGJAB and 7HGJAB are listed below by spec letter. Please refer to your generator's rating plate for your spec letter. HGJAB Spec K A041P558 (Carburetor Only) or A043B781 (Kit- Includes Gaskets)

Read more

See Also: Gas Station  Show details

How to Identify Your Holley or Demon Carburetor Holley

1 hours ago It's like a "VIN" for your carburetor and should be hand-stamped on the front of the choke tower to the right of the vent tube on most typical Holley carbs. The list number typically is four to six digits long and may or may not have a suffix number behind it. The date code will be right below it. Take care not to mistake the casting number and

Read more

See Also: Phone Number  Show details

How to Find the Part Number on a Walbro Carburetor Walbro

8 hours ago Walbro carburetors are mounted in a variety of different positions on outdoor power equipment and sometimes the part number is not easily identified without disassembling the equipment. Louis Salas, Program Manager for Walbro’s Aftermarket Group, explains how to locate the part number in the video below. The Walbro part numbers and letters can be found …

Read more

See Also: Phone Number  Show details

Carburetor Specialist, supplier of carburetors, kits

1 hours ago New original equipment carburetors and new aftermarket service replacement units. Kits and floats for 1000's of applications, including antique, marine, industrial and agricultural carburetors. Choke pull-offs, solenoids, dash-pots, gaskets, adjusting …

Read more

See Also: Gas Station  Show details

REMANUFACTURED CARBURETORS UNITED AUTOMOTIVE …

3 hours ago Remanufactured carburetors, rebuilt carburetors, rochester carburetors, holley carburetors, carter carburetors, ford carburetors, motorcraft carburetors, new hampshire carburetors, boston carburetors, allston automotive carburetors rebuilt auto parts

Read more

See Also: Phone Number  Show details

Quadrajet Casting Number Chart – Cliffs High Performance

8 hours ago Quadrajet Carburetor Numbers 68 and later Date Code Most Rochester built Q-jets used a four-number Julian Date code. The first three numbers are the Day of the Year the carburetor was built; the last number is the Year. For example: Carburetor number 17058201 followed by a Julian date of 1238 would have been built the 123rd day of 1978. One

Read more

See Also: Phone Number  Show details

Walbro Parts at Jack's

3 hours ago We have the Walbro Parts you need, including air filters, carburetors, fuel filters, gaskets and more . For carburetor parts and accessories, think Jack's! Walbro Model Number Lookup:Examine the side of your Walbro carburetor to locate the model number. The number is usually two letters followed by two or three numbers (i.e. WT451).

Read more

See Also: Accessories, Gas Station  Show details

How to find engine replacement part numbers Briggs

4 hours ago The numbers listed next to the part illustrations in our IPLs are called Reference Numbers.These numbers are one to four digits in length depending on the part. The reference number is used to locate the specific Service Part Number (usually six digits) you will require to order replacement parts for engine repair.. Note: To clarify, the example below combines the part illustration and …

Read more

See Also: Phone Number  Show details

Weber Carburetor Identification and Model Numbers

2 hours ago The model number prefix is a 2-digit number that refers to the diameter of the throttle plate(s) in millimeters. (If the prefix is a pair of 2-digit numbers separated by a slash, the first number refers to the primary throttle and the second number to the secondary.) This number alone will not tell us which carburetor you have.

Read more

See Also: Phone Number  Show details

OldSchoolCarbs Home

Just Now We restore, rebuild, and repair Keihin motorcycle carburetors for 1979 thru 1983 Honda CBX, CX500, Magna, Interceptor, Sabre, CB750, CB900, CB1100 and GL1000. We also service Mikuni smoothbore carburetors.

Read more

See Also: Home Phone  Show details

How to Find Your Model Number Briggs & Stratton

5 hours ago On the Engine: Model numbers are located on the physical engine and usually contain a combination of letters and numbers. The numbering system is often segmented into 3 sections: [Model Number] - [Engine Type Number] - [Code Number] Your model number will be either 6, 7, 11 or 12 characters in length.

Read more

See Also: Phone Number  Show details

Parts Lookup Toro Dealer

4 hours ago To find the right Toro part you will need to know the 5 digit model and 9 digit serial number of your product. Note: Most engine parts are not available on Torodealer.com. Contact your dealer or the engine manufacturer. Enter model number or keyword: View Model List. Find Model/Serial Plate. Lookup Help.

Read more

See Also: Contact Support  Show details

Home Keihin Carburetors & Rebuild Kits

600 1994-20033 hours agoCarburetor Rebuild Kit, 2 Sets Carburetor Rebuild Kit Carb Repair Accessories Fit for Hon-da VLX600/VT600 1994-2003 Carburetor Replacement April 25, 2021 Kawasaki Estrella BJ250 W250 Keihin carburetor repair kit Configure float and With 5 pieces jet:118-120-122-125-128

Read more

See Also: Home Phone, AccessoriesVerify It   Show details

Homepage California Air Resources Board

1 hours ago The California Air Resources Board typically has monthly meetings with the agenda available at least 10 days prior to the meeting date. Board Meetings are currently open to the public via remote participation only, and also are available via webcast. In accordance with recently enacted legislation Assembly Bill 361, the October 14, 2021

Read more

See Also: Home Phone  Show details

Carburetor Number Locations – Carburetors And More

9 hours ago Live Carburetor Testing and Rebuilding Procedure; Print and Mail In This Form With Your Carburetor; Carburetor Number Locations; 2×4 Dual Quad Sets; Carter AFB; AVS Carter Original Carburetors; Edelbrock Carbs; Holley Double Pumper Carbs; Holley Motorcraft Autolite; Marine Carbs; Rochester Carbs; Rochester Single Barrel Carbs; AFB Carter Carb

Read more

See Also: Phone Number  Show details

Mikuni Carburetor

9 hours ago Mikuni Carburetor. Mikuni Carburetor Rebuild Kits, Mikuni Parts, Mikuni Carburetors, + Mikuni Accessories & Tools available from a wide range of online sources collected all in one spot. Check-out the wide selection and discount prices. We locate and promote products from a wide range of Mikuni Resellers and Vendors.

Read more

See Also: Accessories  Show details

The LawnBoy Store Parts

4 hours agoSearch: Lawn-Boy Store Parts. Parts Find the Right Part: Start by entering the model and serial number (optional) of your product; If you did not enter a serial number, select the correct serial number range for your product Enter Model Number : View model list: Enter Serial Number : Help me find my model or serial number

Read more

See Also: Phone Number  Show details

Tecumseh Carburetors for Small Engines

8 hours ago Tecumseh Carburetor Part No. 640298. Part No. 640298. Used on Some Model Series (NOT ALL) - email your model & spec number to us if you are not absolutely sure this is the right part for you OHSK70 & OH195SA engines. Please email with the engine's spec number if you do not know your part number. Our Price $59.95.

Read more

See Also: Phone Number  Show details

Rebuilt Carburetors Carb Unlimited

253-833-75737 hours ago OEM Rebuilt Carb Prices Call 253-833-7573 Need Carb Number? View Shopping Cart Search for rebuilt Carbs Search By Year/Make/Model Aftermarket. The best way is by Carb Number. Import and Domestic Conversion Carburetors. Custom Carb Restoration. Direct Line to Rebuild shop 253-833-7573

Read more

See Also: Phone NumberVerify It   Show details

WALBRO Parts & Service ~ Walbro Parts and Service

7 hours ago DISCLAIMER: Please confirm Walbro part numbers and prices with a Walbro Central Warehouse Distributor.

Read more

See Also: Phone Number  Show details

Nikki Carburetor Replacement Parts

(330) 468-26413 hours agoSearch for Nikki Parts. We have a large selection of high quality Nikki aftermarket replacement parts. Enter your part number above to find the replacement part you need! Browse Aftermarket Nikki Parts. Phone (330) 468-2641. Email [email protected] Address 600 E. Highland Road Macedonia, OH 44056.

Read more

See Also: Phone NumberVerify It   Show details

Carburetor Application Catalog by Make & Model

7 hours agoCarburetor application catalog by make & model. Ethanol ready parts. We carry carburetor parts for most applications.

Read more

See Also: Phone Number  Show details

Tech Support Holley Performance

1 hours ago The list number for most performance and factory 2 and 4 barrel carburetors will be found stamped into the upper right hand corner of the airhorn or sometimes called the choke tower. On the 4150 HP models that do not have a choke tower the list number will be stamped into the mainbody behind the throttle linkage.

Read more

See Also: Support Number, Tech Support  Show details

VAPEX Carburetor Fuel & Air Parts RockAuto

5 hours ago Quick Cart. Loading. Loading. Part Number. (Use * for wildcards) Manufacturer. All 3D 3M A-1 CLUTCH COMPANY AAE ACC ACCEL ACDELCO ACI ACME AUTO ADVAN-TECH ADVICS AGS AIMCO AIR PRO AIRQUALITEE AIRTEX AISIN AJUSA AKEBONO AL'S LINER AL-KO ALBANY ALLOY INDUSTRIES ALLPARTS ALO ALTROM AMERICAN COMPONENTS …

Read more

See Also: Tech Support  Show details

OPE08 Rebuilt Carburetors Guaranteed Carburetors

Just Now OPE08-Isuzu Pick-up and Amigo 2.3 Liter Hitachi original carburetor. Has a square 4 pin grey wire connector and a 2nd 2 pin wire connector.

Read more

See Also: Phone Number  Show details

Carb Manager Support

9 hours ago The quick-start guide for setting up and using Carb Manager. Set your goals. Set or reset your diet, health, and activity goals. Customize app settings. Connect fitness devices, adjust your preferences, and set reminders. Track foods, activities, and fasting.

Read more

See Also: Support Number, Health  Show details

Best Carburetor Parts for Cars, Trucks & SUVs

9 hours ago The carburetor consists of a float and venturi (or barrel). Most carbureted vehicles have between 1 and 8 barrels, and the number of barrels generally increases along with the engine displacement size. Fuel enters the carburetor through an inlet in the float bowl. The carburetor float regulates the amount of fuel that enters the engine.

Read more

See Also: Phone Number  Show details

All Time (45 Results)Past 24 HoursPast WeekPast month

Please leave your comments here:

New Contact Listing

Frequently Asked Questions

How can I find the correct carburetor for my car?

To find the right carburetor, float bowl, diaphragm, or primer bulb for your engine, simply enter the full model number of the engine in Repair Clinic’s search bar, then select "Carburetor” from the part category filter followed by the relevant part title.

Where to find the part number on a Walbro carburetor?

Walbro carburetors are mounted in a variety of different positions on outdoor power equipment and sometimes the part number is not easily identified without disassembling the equipment. Louis Salas, Program Manager for Walbro’s Aftermarket Group, explains how to locate the part number in the video below.

Where do you find the model number on a Weber carburetor?

On downdraft carburetors, Weber stamps the carburetor model number on the side of the base flange. Sidedraft carburetors have the model number stamped on the top, outboard of the jet cover. Note that the stamp on the downdraft may be facing the engine. You may need a flashlight and a mirror to see it. Click either photo to enlarge.

How do I identify my Holley carburetor number?

On the air horn the top number is 3885067-EE, the next line is List 3246, and the next is 3682. I get the List number, but what are the other numbers and is there a way to tell what car this carb is from?

Sours: https://www.webcontactus.com/carburetor-number-lookup/
How to Find the Part Number on a Walbro Carburetor

Carter

The Carburetor Shop LLC

204 East 15th Street

Eldon, Missouri 65026

 

Home|History|F.A.Q.|Orders|Contact Us|SELL TO US

Carburetors|Repair Kits|Other Parts|Literature|Tools|Articles|Troubleshooting|Carburetor Identification

Passenger Kits|Truck Kits|Tractor Kits|Industrial Kits|Marine Kits|Multi-carb set-ups

Car Comics|Car Records|Stamps and Coins |Car Trading Cards|Subscription Cards|Oakland and Pontiac

 

Tips on identification of various carburetors

 

Carburetor Identification Service 

 

Carter, Holley, Marvel, Marvel/Schebler, Rochester, Schebler, Stromberg, Zenith

 

 

Brass Series (A,C,G,H) – (1909 – 1922) 1 barrel updraft (have no information to further identify these units)

Brass Bowl Series (DFT08, DR0, DRH0, DRJH0, DRJX0, DRJH08, DRX0, RAJH0, RAJX0, RAKX0, RJH08, R0, RT08, RX0) – (1923 – 1932) (1 barrel updraft) red cardboard tag (some later service replacements tagged with a triangular brass tag)

U Series (U-1) (1932) brass tag

W Series (W-0, W-1, WA-1, WE, W-2) - (1932 – 1949)(1 barrel) triangular brass tag; also, code number stamped under base

W Series (WCD, WD0,WGD) – (2 barrel)(1936 – 1967) metal tag; also code number stamped under base

W Series (WCFB) – (4 barrel) (1952 – 1965) metal tag; also code number stamped under base

AS Series – (1 barrel) (1956 – 1963) metal tag

RBS Series – (1barrel) (1963 – 1974) metal tag; also some (not all) stamped id number on edge of flange

AFB Series – (4 barrel) (1957 – 2001) metal tag: also some units stamped on edge of flange, some units stamped center of bowl in rear, some units stamped along bowl – airhorn seam in front, some units NOT stamped (tag only)

BB Updraft Series – (1 barrel) (1932 – 1963) rectangular brass tag

BBR Series (BBR-1, BBR-2) – (1 barrel) (1933 – 1938) rectangular brass tag

BBR Series (BBR-1, BBR-2) – (1 barrel) (1939 – 1960) letter number combination stamped on side of airhorn strengthening vane

BBS Series - (identified by tag only, once the tag is removed, identification is extremely difficult

BBD Series- identified by tag only, once the tag is removed, identification is extremely difficult

YF Series (YF, YFA) - most O.E. carbs stamped with the number followed by letter ‘S’ on center section (bowl)

UT Series – identified by tag only, once the tag is removed, identification is extremely difficult

N Series (N, ND, NRD) – some stamped on edge of flange, others tagged

 

Carter numbering systems. Three different types of numbering systems are found on Carter produced carburetors.

 

(1) On carburetors built for Chrysler Corporation, a series of 3, 4, or 5 letters and numbers; i.e. EV1 or D6H2.

(2) On carburetors built for Ford Motor Company, the “Ford” numbering system which is “lnll – l(l)(l)” or letter, number, letter, letter dash letter (possible letter) (possible letter) i.e C5VF-A. This system is codified in that the first letter is the decade (B=1950’s, C=1960’s, etc.); the number is the last digit in the year; the 3rd and 4th letters (before the dash) represent the vehicle model (VF=Lincoln); and the letter or letters after the dash are a modifier which distinguishes the exact application. Thus in the example C5VF-A, the carburetor would have been the first application for Lincoln in the year 1965.

(3) The traditional Carter numbering system which consisted of 1, 2, 3, or 4 digits; followed by the letter “S”, possibly followed by another letter. It is extremely doubtful that any of the single, double, or early triple digit tags will appear; as they were produced before 1930 and were constructed of red cardboard. The metal tag appeared about 1930 with tag numbers of about 300s. The 4 digit tag appeared in 1952, and was continued on until the end. The letter S and following letters, when present, have caused much speculation (mostly incorrect). In Carter’s terminology, an individual part such as an idle mixture screw was a single part; whereas two or more individual parts sold together such as a needle, seat, and gasket were sold as an “assembly”. Carter used the suffix letter S to denote assembly. Since all carburetors are composed of multiple parts, the letter S was appended to all carburetors using the traditional numbering system i.e. 938s. If a significant engineering change was made to the carburetor, the letter “A” would be appended to the S (i.e. 938sa). A second change would have the letter A replaced by the letter B (i.,e. 938sb). The highest engineering change of which I am aware is 4 i.e.938sd. Contrary to popular belief, the S DID NOT mean standard transmission, nor the SA automatic transmission.

 

 

Updraft – brass bowl – must be identified from pictures of actual linkage and internal specifications (no identification numbers)

Updraft – diecast bowl – an identification number is stamped in tiny numbers on the underside of the bowl, or on the edge of the carburetor mounting flange. The number will be in the format 10-nnnn, where nnnn is some number generally LARGER than 500. Some Pontiac and Oakland units have a stamped “O” or “P” preceding the 10.

Downdraft – an identification number will be stamped SOMEWHERE on the outside surface of the carburetor in tiny numbers. Areas to look: the bowl cover, above the float; the edge of the flange of the bowl where it fits to the throttle body, on the throttle body itself. Downdraft Marvel models were B, BD, and CD. The D in the BD and CD meant duplex or two-barrel.

 

Additional information with Marvel casting numbers: MARVEL CASTING NUMBERS

 

 

Please see the history blurb under Schebler. Some of the Marvel models, and Schebler models were continued as Marvel/Schebler models. The identification on Marvel/Schebler is difficult to pigeon-hole, as different forms were used for the same model in different years. GENERALLY, Marvel/Schebler identification numbers would be in the same format as Schebler numbers (please see the Schebler section) BUT NOT ALWAYS. Example: the letter X was not used on models such as the TSV, VD, VH which were mostly small engine. Marvel/Schebler numbers could have been STAMPED into the casting; stamped into a riveted rectangular tag; stamped into a riveted teardrop shaped tag, and some of the late small engine carbs had the number stamped on a round tag. A quirk of the identification system which really is confusing until you know about it, especially on the TS series tractor carburetors, is as follows:

 

The information stamped into the tag might read:

 

TSX

6 51

241B

 

This is one of the more common carburetors. This is a TSX-241B produced the 6th month of 1951. It is NOT a TSX-651. The center line is a date code!

 

Marvel/Schebler models are as follows:

 

DD

DLT

GLE

SL

TC

TR

TSV

TS

TT

US

VD

VH

VHD

 

As my Marvel/Schebler information gets very sketchy in the 1960’s, I am unable to give a year range for these models.

 

 

AA Series – (1949, 1950) (2 barrel) triangular metal tag

B Series (B, BC, BV) – (1949 - 1967) (1 barrel) triangular metal tag.

BB Series – (1951) (2 barrel) triangular metal tag

2G Series (2G, 2GC, 2GV) – (1955 - 1967) (2 barrel) triangular metal tag

2G Series (2G, 2GC, 2GV) – (1968 – up) (2 barrel) roll stamp on side of bowl

4G Series (4G, 4GC) – (1952 – 1967) (4 barrel) triangular metal tag

H Series (H, HV) – (1960 – 1967) (1 barrel) triangular metal tag

H Series (H, HV) - (1968, 1969) (1 barrel) roll stamp on side of bowl

Monojet – (1968 - up) (1 barrel) roll stamp on side of bowl

Quadrajet – (1965 – 1967, some early 1968) (4 barrel) round metal tag pressed into side of bowl

Quadrajet – (1968 – up) (4 barrel) vertical roll stamp on side of bowl

R Series – (R, RC) – (1962, 1963) (1 barrel) triangular metal tag

 

Tags: Tags beginning in 1949 were brass. The metal was changed to aluminum approximately 1956. There appears to be some time overlap in the different series. The aluminum tags were color anodized on the top side. The color used was a code to help identify the carburetors. A few times in carburetor cleaner, and the color disappeared to a natural aluminum finish. The triangular tags were located under one of the screws holding the air horn to the bowl. The round tags (1965 – 1967 quadrajets) were pressed into an indent in the side of the bowl directly behind the primary throttle arm.

 

Roll stamps: Beginning in 1968, all Rochester carburetors were "roll stamped" with the identification number on the side of the bowl. These are "stamped" or "recessed" numbers, not "raised" as discussed below.

 

Other identification numbers: A very few 4G Series carburetors in 1957 only were stamped with the last 4 digits of the identification number on top of the air horn. Very early B series have the last 2 digits of the identification number stamped on the airhorn.

 

Casting (raised) numbers: Raised numbers appearing on various castings are so-called "casting" numbers. These numbers were used by Rochester to identify a casting "blank" PRIOR to machining. A casting could be machined into different parts. As an example; consider the throttle body of the 1957 Pontiac tripower: the front carburetor has no idle screws in front, and an 1/8 inch pipe tap in the rear; the center carburetor has idle screws in front, and an 1/8 inch pipe tap in the rear; the rear carburetor has neither idle screws nor pipe tap. ALL have the same casting number. IT IS IMPOSSIBLE TO IDENTIFY ROCHESTER CARBURETORS FROM CASTING NUMBERS ALONE!

 

Carter built quadrajets: Carter Carburetor Company of St. Louis produced millions of quadrajets under license from GM from 1966 through 1979. These carburetors carry the exact same identification as their Rochester counterparts, and parts are directly interchangeable. Carter also produced "aftermarket" replacement quadrajets, which will be identified by the traditional Carter part number (4 digits, followed by the letter "S"). An example of this numbering system would be 4675S, which is identical except for the number to 7028262.

 

Rochester part numbers and application: Virtually all Rochester carburetornumbers produced from 1949 through 1974 are included in the application listings on this website.

 

 

The Schebler Carburetor Company started producing carburetors about 1902. The Schebler Carburetor Company was purchased by Borg/Warner about 1930, along with a number of other carburetor companies including Marvel. Borg/Warner combined the Marvel and Schebler brands and came up with Marvel/Schebler. SOME of the Schebler models were held over and were then produced by Marvel/Schebler. The Schebler models (also known as Wheeler Schebler in the early days) would have STAMPED identification numbers. These numbers are in the format: “model” “X” “number” and should be referred to as model “model” assembly number “number”. Example: DX-320. The model is D and the number is 320. This should be read as model D assembly number 320 OR DX-320 for short. Application information on most Schebler carburetors is difficult to find. Also, Schebler made replacement carburetors in the same models as original equipment carburetors. While we have very good information on the Schebler models DL, DLT, H, S, T, and U; we would appreciate ANY OTHER ORIGINAL Schebler application information from possibly an owner’s manual, shop manual, etc. We do have Schebler information on quite a few models L and R, but unable to determine if these were used as original equipment or aftermarket. Listed below are Schebler models of which I am aware, and year ranges these were produced.

 

A (1913-1936)

AH (1915-1922)

AL (1918-1921)

AM (???)

AT (1911-1933)

B (1916)

D (1903-1938)

DL (1915-1940)

DLT (1926-1930)

E (1906-1911)

FA (1912-1926)

G (1926-1934)

H (1907-1926)

HD (1927-1934)

L (1908-1925)

R (1914-1921)

S (1920-1933)

T (1930-1933)

U (1927-1932)

 

 

The following applies to Stromberg-USA carburetors, and does not apply to Stromberg carburetors produced elsewhere:

 

Stromberg began stamping a ‘code’ number on virtually all O.E. (original equipment) carburetors beginning in 1935 up through the end of production in 1974. Most of the carburetors produced in the late 1930’s were stamped on the throttle body. Others were stamped on the airhorn. After 1940 this trend was reversed, and most carburetors were stamped on the top surface of the airhorn along one of the edges. Replacement carburetors produced during this period were generally identified by tag only (although a few replacements were stamped). The stamped ‘code’ is in the format ‘ccc-nnne’ where ccc is a one, two, or three digit code representing the company for which the carburetor was produced (ie 2=Ford, 4=Chrysler, 7=Buick, etc.); nnn is a one, two, or three digit number representing the next sequential number of carburetor sold to the company in ‘ccc’; and e is a letter (if present) representing the engineering change status of the carburetor. An example would be 7-69A which is decoded as 7 (Buick); 69 (the sixty-ninth type of carburetor sold to Buick – this one fits a 40 series in 1949); and ‘A’ meaning one engineering change to the original specifications. A second change would be 7-69B. Stromberg used both rectangular (held in place by a screw) and round (riveted in place) tags during this period, on those units which were tagged.

 

Stromberg carburetors produced prior to 1935 can easily be identified as to type, as it is cast onto the carburetor; however complete identification is impossible unless one has prior knowledge of the carburetor being identified; and can be quite difficult and time consuming for even someone with the original prints.

 

Zenith

 

The following applies to Zenith-USA carburetors, and does not apply to Zenith carburetors produced in elsewhere:

 

Zenith carburetors produced from about 1932 to 1980 have a round tag, approximately the size of a US dime, riveted to the body of the carburetor. Original equipment carburetors will have two numbers stamped on this tag. The outer circle will be the O.E. part number (ie Allis Chalmers, GMC, IHC, etc.). The inner circle will be the Zenith number. Aftermarket carburetors made during this period will have the Zenith part number only on the tag.

 

Zenith carburetor produced after about 1980 will not have the round tag, but will have a tiny number stamped (never raised) in a semi-circle on the body of the carburetor.

 

Some Zenith carburetors produced in the 1920’s up to about 1935 have a long thin rectangular tag with the Zenith number stamped.

 

Identification of Zeniths other than above is difficult.

 

The following chart has been copied (with permission) from a factory Zenith publication, and will help the hobbyist understand the meaning of the Zenith models. This does NOT identify individual carburetors, only the identification number can be used for positive identification:

 

A – designates a carburetor where the throttle shaft is parallel to the air shutter shaft (with normal air intake).

B – designates a carburetor where the throttle shaft is at right angles to the air shutter shaft (with normal air intake).

BB – same as above but with fly opening opposite of above (B).

C – vacuum pump, NO power jet.

DA – duplex carburetor with one throttle shaft.

DB – duplex carburetor with two parallel throttle shafts.

E – elbow air intake ( for downdraft, horizontal and updraft carburetors, when the angle of the air intake differs from that of the standard of the series)

F – governor connection, opposite side from bowl or on left side.

G – a carburetor using natural gas or a combination of gasoline and natural gas for fuel

GM – special 30 series to General Motors

I – special for International Harvester, Inc.

J – back-suction economizer

L – large bowl ( model 267 carburetors)

LP – liquid petroleum gas carburetor

M2 - marine carburetor with screws, brackets, levers, and shafts in brass.

M3 – marine carburetor with brass bowl and iron barrel

M4 – marine carburetor, all brass

N – special for Novi governors

O – offset throttle shaft (only in case it differs from the standard).

P – pump (14 and 16 models)

R – governor connections, same side as bowl or on right side

S – straight thru for updraft carburetors

T – balanced or sealed bowl vent

U – universal replacement carburetor special flange c.c

V – vacuum operated power jet if the standard of the series has mechanical pump or no pump

W – vacuum pump AND power jet

X – oversize flange and/or bolt location

Y – undersize flange and/or bolt location

 

The following for letters FOLLOWING the carburetor size:

 

C – automatic choke

G – gas valve attachment for LPG

R – Facet regulator or governor

RP – Pierce governor

RZ – Mechanovac governor

S – special flange

SD – LP starting device

 

 

IF You Have Carburetors to Identify

 

We offer a carburetor identification service. If the carburetor can be readily identified (tag, or stamped identification number) there is a $20. charge per carburetor.

 

Some carburetors can be identified by casting number (most cannot). Again, this would result in a $20. per carburetor charge.

 

Many older (especially brass) carburetors can be identified easily only into a group of applications (example: a Zenith O-4). These carburetors have different internal venturi, different calibrations, and different throttle and choke hook-ups. Absolute identification, while possible, normally would exceed the value of the carburetor! There is a $40. charge for a print-out of the various applications for a carburetor such as this.

 

Some carburetors in this group are worth the absolute identification. An example of this would be the Stromberg EE-3. These were used on Duesenbergs, Chrysler Imperials, Pierce-Arrows, Delahayes, Deloges, etc. To positively identify one of these, we generally need to inspect the carburetor in person. Cost will vary with the amount of time necessary. Occasionally, one of these can be done via telephone (we would tell you what to look for). An example of this is the Duesenberg EE-3 is the only one to use 1 3/8 venturi. This number is cast on the outside of the bowl.

 

Many carburetors are simply not worth the time to positively identify. Examples of these would be Rochester 1 barrel units used on primarily Chevrolet 6 cylinders of the 1950’s and 1960’s. These were identified by a tag. Once the tag is removed, identification is extremely difficult.

 

If you wish carburetors identified, the best method is to send us a list by manufacturer, type, and identification number (if present). We can then tell you what we can identify, and the costs. Pictures may, or may not be sufficient for identification.

Sours: https://www.thecarburetorshop.com/Carburetor_ID.htm

Lookup carburetor number

 

Carburetor

Holley

Holley carburetors have been used on high performace engines since the early '60's. Their modular design, inclorporating a metering block for the jets and power vales, made it easy for anyone to rebuild their carburetor.

The air horn of the carb will be stamped with several numbers, including the Holley list number, the Chevrolet part number, and usually a letter indicating the application. There is also a date code.

Holley Carburetors
YearCarb
Model
List
Number
Part
Number
EngineHorse-
power
Trans-
mission
Notes
1967416038113906633 EO396375Std w/o A.I.R.early
416038153906637 EC396375Std A.I.R.
415039103916143 CT302290Std w/o A.I.R.Z/28
396375L78 (late)
415039113916145 CU302290Std A.I.R.Z/28
396375L78 (late)
1968415040533923289302290StdZ/28
396375L78
L89
1969302290Z/28
1968415042103941140302290StdZ/28
Crossram
196942953957859
1969415042963955205427430allZL1
43463959164 GE425COPO
396375L78
L89

 

Rochester

8hspace.gif (810 bytes)Rochester Carburetors were used on all standard performance Camaros. There are three types of identification on Rochester carbs. Models B, 2G, and 4G used a triangular metal tag installed beneath the air horn screw. The early Model M (Monojet) and 4M (Quadrajet) used a circular tag in a cavity in the side of the float bowl. Other carburetors used a stamping on the body of the carb.
8hspace.gif (810 bytes)The numbers include the model number, usually 7 digits, a change letter, signifying changes during the model year, and a date code.
8hspace.gif (810 bytes)The stamping or part number decodes as follows:

Example: #70 2 8 2 1 9 DG 1938

  • 70 - Prefix code. "70" will appear on all late '60's Rochester Carburetors.
  • 2 - Decade produced.
    • 2 - 1960's
    • 3 - 1060's with A.I.R.
    • 4 - 1970-1975
    • 5 - 1976-1979
    • 8 - 1980's
  • 8 - Year produced. 8=1968
  • 2 - Model
    • 0 - Monojet (1 bbl) Federal standards
    • 1 - Two jet (2 bbl) Federal standards
    • 2 - Quadrajet (4 bbl) Federal standards
    • 3 - Monojet (1 bbl) California standards
    • 4 - Two jet (2 bbl) California standards
    • 5 - Quadrajet (4 bbl) California standards
  • 1 - Division. 0, 1, and 2 all indicate Chevrolet.
  • 9 - Transmission
    • Even numbers - Automatic Transmission
    • Odd numbers - Manual Transmission
  • DG - Customer code.
  • 1938 - Date Code

 

Rochester Carburetors
Part
Number
Carb
Model
YearEngineHorse-
power
Trans-
mission
Notes
2 Barrel
7027112GV1967327210ST
70271032GV1967327210STA/C
70271102GV1967327210ATearly
70271142GV1967327210ATlate
70271162GV1967327210ATA/C
70281012GV1968327210ST
70281032GV1968327210STA/C
70281102GV1968327210AT
70281122GV1968327210ATA/C
70291012GV1969307/327200/210ST
70291032GV1969307/327200/210STA/C
70291102GV1969307/327200/210AT
70291122GV1969307/327200/210ATA/C
70291132GV1969350250ST
70291142GV1969350250AT
70291152GV1969350250STA/C
7291162GV1969350250ATA/C
70371012GV1967327210STA.I.R.
70371032GV1967327210STA.I.R. A/C
70371102GV1967327210ATA.I.R.
70371122GV1967327210ATA.I.R. A/C
4 Barrel
70272004MV1967396325ATearly
70272014MV1967396325STearly
70272024MV1967327275AT1st type
350295
70272034MV1967327275ST1st type
350295
70272104MV1967396325ATlate
70272114MV1967396325STlate
70272124MV1967327275AT2nd type
350295
70272134MV1967327275ST2nd type
350295
70272164MV1967396325AT3rd type
70272184MV1967327275AT3nd type
350295
70282104MV1968396375AT
70282114MV1968396375ST
70282124MV1968327275AT
350295
70282134MV1968327275ST
350295
70282174MV1968396350ST
70282184MV1968396350AT
70292004MV1969396325AT
70292014MV1969396325ST
70292024MV1969350255, 300AT
70292034MV1969350255, 300ST
70292044MV1969396350AT
70292154MV1969396350ST
70372004MV1967396325ATA.I.R.
70372014MV1967396325STA.I.R.
70372024MV1967327275AT1st type A.I.R.
350295
70372034MV1967327275ST1st type A.I.R.
350295
70372104MV1967396325ATlate A.I.R.
70372114MV1967396325STlate A.I.R.
70372124MV1967327275ST2nd type A.I.R.
350295
70372134MV1967327275ST2nd type A.I.R.
350295
70372164MV1967396325AT3rd type A.I.R.
70372184MV1967327275ST3rd type A.I.R.
350295

 

Carter-built Rochester Carburetors

8hspace.gif (810 bytes)Carter built Quadrajets for General Motors in the 1960's. All Carter-built carbs have "MFG by Carter" cast into the carb body. The carb number matches the Rochester number.

Sours: http://www.holisticpage.com/camaro/parts/carb.htm
Serial number lookup husqvarna husqvarna chainsaws. the model number of a husqvarna chains

Victor and Alexandra had sex again. This was repeated twice more. They fucked, and I aroused them with my mouth. In the end, they fizzled out and lay tired on the bed. I was driven off her and sat next to me like a dog.

Now discussing:

That's all, guys. You can run to your concert. And let the checkmark come in again. She needs a couple more teeth to look at.



196 197 198 199 200