What would become of laundry sessions if there were no appliances to make the process efficient? The only sure thing is that house chores would not be the same. Samsung appliances are among many other home appliance brands that continue to revolutionize how you tackle your daily household chores by offering unmatched convenience and comfort. The Samsung dryer, in particular, hastens the drying process of your washed laundry. It allows you to go through a complete laundry schedule in a short period, ensuring you get your preferred attire for your next appointment fresh and clean. What happens when your Samsung dryer breaks down?
When your Samsung dryer breaks down, you are likely to switch to a new dress code for your appointment. Your clothes will not dry on time for starters, and your entire laundry schedule will be affected. Fortunately, all will not be lost as you can sundry your clothes and get the same results, but you will have to wait longer. When an electric Samsung dryer breaks down, it will not run a full cycle. It will show an error code on its digital display screen. When the error code shown on the display screen is the hE fault code, the dryer will likely run for twenty-second before stopping, irrespective of the cycle you choose.
What Does HE Error Mean?
Important: As a homeowner, realizing that you need to waste another Saturday waiting for the landlord or handyman to come over to fix another damaged appliance is frustrating. It shouldn't feel like the norm to constantly have damaged appliances and systems in your home since it can come to a huge cost at the end of each year. The HE error can also be displayed as hE. It indicates a heating error in your Samsung dryer, both the gas and electric dryer. This article will explore the hE error in both the gas and electric heater.
The Home Improvement Solutions eBook covers everything you need to do in your home when it comes to maintenance and improvement so you can avoid wasting another weekend waiting for someone to come to your rescue.
HE or hE Error Code in Gas Dryer
When this fault code appears on a gas dryer, it may indicate a problem within the appliance’s gas supply. Examine the dryer’s gas supply cut-off valve to ensure it is fully open. Unplug your machine from its power supply and fix all the loose connections while you reconnect broken wiring on your gas valve coils. Replace your dryer’s wire harness if it is damaged. Call an appliance specialist to inspect your machine’s heating system. Use these steps to fix this problem.
- Start by inspecting your dryer’s gas supply cut-off valve
- Unplug your dryer from its power source
- Inspect the machine’s wiring and reconnect all loose wire connections on your gas valve coils. You can use your machine’s wire harness alternatively if it is damaged
- When these corrective measures do not fix the problem, you need to call a qualified appliance repair technician
HE or hE Error Code in Electric Dryer
This error code appears on your electric dryer’s display as an indication of a faulty supply of power to the machine. When you see it, you should inspect the dryer’s house circuit breaker to find out if it has tripped. Your dryer will not heat if its leg of the 240-volt power supply is not turned on. You need to cut the power supply to your dryer by unplugging it from its wall socket. After cutting the power supply, you need to examine the wire connection on your appliance’s heating element. Reconnect all the loose wire connections and replace all the damaged wire harness. It would be best if you also inspected your dryer’s heating element for signs of damage. Replace it if it is defective.
Before you begin working on the dryer, you should inspect your home’s circuit breaker in the electrical box. Check if the breaker has tripped. Then disconnect your appliance from its power source. After doing this, you should inspect the machine’s wire connection on its heating element. Replace damaged wire harness and reconnect all the loose wires.
In some cases, the washer might breakdown as a result of a faulty thermistor. When this happens, it shows the hE error code on its digital display screen. To fix this problem, you need to unplug your dryer from its power source and remove the thermistor from its current location. Use an ohmmeter to get the readings of the thermistor (view on Amazon). Test the thermistor at room temperature. Its expected result should be about 10 k ohms. However, if you get results further from this, it means you will need to replace the thermistor sensor.
How to Replace a Faulty Thermistor
Typically, the thermistor is attached to the blower housing and takes temperature readings within your dryer. When the thermistor fails to sense the temperature, an error code will be displayed on your dryer’s digital screen, and the machine stops. Therefore, you will have to replace the thermistor to restore your dryer to its optimum efficiency. It would be best if you only replaced it with a manufacturer-approved replacement. Follow these steps o replace the thermistor from your dryer.
Switch off your dryer’s power supply
You can do this by unplugging the dryer from its power source. Cut the supply of gas if you are using a gas dryer.
Remove Your Dryer’s Service Panel
You can release the clips holding your dryer’s service panel in place by pushing a putty knife in the gaps above your machine’s service panel on either end. Pull your dryer’s service panel forward, from the top, to remove it from its original location.
Remove the Dryer’s Lint Duct Assembly
Pull out your appliance’s lint screen by removing the screws that hold the lint duct assembly to your dryer’s lint duct housing. Later, pull out your machine’s lint duct assembly and put it aside.
Detach Your Dryer’s Thermistor
Find the thermistor on top of the blower housing. Gently, remove the wires from your thermistor.
Use a quarter-inch wrench to get rid of the mounting screws that hold your appliance’s thermistor on top of the blower housing. Once all the screws have been removed, pull out the thermistor and set it aside.
Install Your Net Thermistor
Put your new thermistor atop the blower housing and replace the mounting screws. Tighten the screws to secure your newly installed thermistor. Connect wires to your newly installed thermistor irrespective of the spade connectors you fix the wires to.
Replace Your Machine’s Lint Duct Assembly
Put the lint duct assembly in its housing. Put back the mounting screws and fasten them tightly. Once this is done, you need to reinstall your lint screen.
Reinstall Your Dryer’s Service Panel
Line up the service panel’s bottom lip with the base of your dryer. Once this is done, you need to push the top of your dryer’s service panel to engage its locking clips.
You Need to Know This About Your Dryer
If you’re always having problems with your dryer, you need to know what’s causing the issue and if you’ll need to get the dryer repaired or replaced. Having a dryer is crucial for any home, and fixing it is just one form of home improvement, but there are many more.
If you want to save $100s on Home Repair, learn the most important home maintenance and home improvement procedures, and increase the value of your home, you can download our Home Improvement Solutions book now. With it, you’ll learn about a wide range of home maintenance and improvement topics, and you’ll be able to make your home a better place to live in. There are also a bunch of tips in there that’ll save you loads of time and money when it comes to repairs, DIY, and general home hacks that you can’t find anywhere else.
Whether you are a new homeowner, have owned a home for years, renting, or just love home repair and improvement topics, our guide will give you an in-depth explanation of many everyday home maintenance procedures. A lot of our readers use this book to increase the value of their homes, and they’ve saved a lot of money on things like repair that would have cost a professional handyman $100s of dollars.
Reconnect Power to Your Machine
After ensuring everything is connected properly, you need to restore power back to your dryer by plugging it into the wall socket. If you are using a gas dryer, you need to turn on its gas supply.
Clogged Lint Screen or Vent System
The hE error code indicates that your machine is getting too hot. This could be a result of a clogged vent or lint screen. You can fix this problem by cleaning the vent system or the lint screen or both.
You can easily spot a faulty thermistor, especially when your dryer cycle is not working. The role played by this part is crucial to your appliance’s optimum efficiency. Given that it is an electrical part, you need to take all the necessary precautionary measures to protect yourself against electrocution.
This guide will help you fix your Samsung dryer the next time hE error code shows on the dryer’s display screen. In case, all these solutions fail to work, you need to call an appliance repair specialist to restore the dryer to its normal state of function. You should also interrogate your appliance’s age. If it is too old, you should consider buying a new dryer to replace the old unit. A new dryer might be what you need to continue enjoying uninterrupted dryer service for years.
Job GithuriSours: https://homebli.com/samsung-dryer-he-error/
Are you experiencing a Samsung Dryer HE Code? If so, you might be wondering how you can fix it. What is wrong with your dryer? What is causing it to show this HE code? There are a few important points you should keep in mind.
What Does an HE Error Code Mean?
HE stands for heating error. This means that something is wrong with the heat supply in your Samsung dryer. This could be a gas issue or an electrical issue.
In order for your dryer to work properly, it has to have a steady heat supply. If there is something wrong with the heat supply, it is not going to be able to dry your clothes properly.
Samsung Dryer Error with the Heating Element: Gas Supply
In some cases, this error code could indicate that there is something wrong with the gas supply. Therefore, you should take a closer look at the dryer gas supply cut-off valve. Make sure it is completely open.
You may also want to unplug your machine from a power supply. Then, take a look at the loose connection. You may notice broken wires or issues with the gas valve coils.
Steps To Take with a Gas Dryer
If you have a gas Samsung dryer, then there are a few steps you should take. These include:
- Start by unplugging or disconnecting your dryer from its power source
- Then, take a close look at the gas apply cut off valve
- Take a closer look at the wires throughout your dryer
- If you notice any loose wire connections, you will need to reconnect them to the gas valve coils
After you have finished the steps, reconnect the dryer to the power source. Then, turn it back on. If it does not boot up again, you will need to call a professional for help.
Call a Professional
If at any point you feel uncomfortable performing these steps, you should stop. That way, you place your safety first. Then, reach out to a professional who can come and take a closer look at your Samsung dryer. That way, you can solve this error code HE.
Electric Dryer Error Code HE
If you have an electric dryer with an error HE, this could indicate that something is wrong with the power supply.
If you are noticing that something is wrong with your power supply, you should take a look at the circuit breaker. Make sure it has not been tripped.
If your dryer does not have its volt power supply turned on, it will not work properly.
Steps To Take with an Electric Dryer with Error Code HE
If you have an electric dryer, you should take these steps:
- Start by disconnecting your dryer from its power supply. You may need to unplug it from the wall socket.
- Take a look at the wire connection between your appliance and the heating element.
- If you notice there are any loose wire connections, reconnect them.
- Look for any signs of obvious damage to your heating supply.
If you notice any damaged parts, you will have to replace them. There may be some situations where you need to call a professional.
A Thermistor Issue
There might also be an issue with your thermistor. This will display as an HE error code. You will need to unplug the dryer from a its power source. Then, you will have to remove the thermistor itself.
You may have to use an ohmmeter to check the quality of your thermistor. It should read approximately 10,000 ohms. If you do not get this reading, you may need to replace it.
Replace a Faulty Thermistor
The thermistor is responsible for taking temperature readings of your dryer. If your thermos or is not sensing the temperature properly, your dryer will not know how hot it is. Therefore, it will stop beating your laundry.
In order for your dryer to operate at optimal efficiency, you have to have a working thermistor.
The steps include:
- Start by switching off the power supply.
- Then, remove the dryer service panel.
- You will have to remove the lint duct assembly after this. You will need to remove the screws that hold the link duct housing intact.
- Finally, you should detach your dryer thermistor.
After you have removed these parts, you should be able to install your new thermistor. Make sure it is working properly. You may need to reach out to a professional for help
Put the Dryer Back Together
After this, you'll have to put your dryer back together. You should install your new thermistor, replace the lint duct assembly system, and reinstall the service panel. After this, you should boot your dryer up again. It should be working properly if you solved the issue.
A Clogged Lint Screen or Vent System
Finally, there might also be an issue with your lint screen or vent system. This is responsible for keeping your dryer cool. If there are issues with your vent system or lint screen, you may notice an HE error code.
Clean or Replace the Lint Screen and Vent System
In order to solve this issue, you have to remove or replace the lens screen and vent system. Remember that you should clean your lint screen and vent system from time to time. Eventually, these systems may become so clogged they have to be replaced.
Once you replace or clean the lint screen and vent system, the HE error code should be fixed.
My Samsung dryer. It lights up will not start
User Control and Display Board
To determine if the user control and display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the control and display board might need to be replaced. Additionally, if the display is not working, check the power to the user control and display board. If the user control and display board has power, but it isn’t working, replace it.
The timer is frequently misdiagnosed—before replacing the timer, first check all of the more commonly defective parts. To determine if the timer is defective, consult your washer’s wiring diagram and use a multimeter to test the timer for continuity.
The line fuse blows if the washer circuits are overloaded. If the line fuse blows, the washer won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should investigate and resolve the problem that caused the fuse to blow. Check for shorted out components such as the wires, motor, or drain pump. If you don’t resolve the underlying issue, the new fuse will blow too.
Was this answer helpful?
When something goes wrong with your dryer, such as when it displays an error number, or when it is not turning on, spinning, beginning, or heating, you may believe that all that is required is a good reset.
However, this is not always the case. In many cases, strange electronic malfunctions (such as those that may occur after a power loss) can be resolved with a simple reset, but if this does not successfully restart the dryer, further troubleshooting will be required.
However, depending on the problem you receive, it may or may not be a good idea to restart your computer at the first hint of difficulty.
To discover how to reset your computer, when it is appropriate to do so, and what to do if a reset does not work, continue reading this article.
Quick Guide on How to Replace Heating Element in Samsung dryer
What does UR mean on Samsung washer?
What you need to Know About Samsung Washer Warranty
You must first turn off the power at the circuit breaker, or you may just unhook the dryer from the wall socket and leave it out for a period of time, in order to successfully reset your Samsung dryer.
While there is no electrical current running into the dryer, you should wait for the electrical charge to dissipate before continuing.
You can wait up to 5 minutes after that before plugging in the dryer and turning it on so that the electrical current can begin to flow back into the device.
The control board of your Samsung dryer is in charge of all of the dryer’s activities, and it is used to regulate the unit’s temperature and drying time.
First and foremost, you must have received an error number from your Samsung dryer; the dryer has a variety of error codes that each represent a different problem that the dryer is now facing.
Resetting some error codes can clear them, however, troubleshooting other problem codes will need to be performed.
The most common Samsung Dryer control board problem codes, as well as the ways to troubleshoot them
Because the classic Samsung Dryers do not typically have a digital display, the error codes will be displayed as blinking lights when an error occurs. The following are the fault codes that may be displayed on digital displays for units with digital displays.
Error Codes for the Temperature
If you see any of the trouble codes listed below in your dryer’s display, it means that the dryer’s temperature sensor or the sensor that measures the temperature is malfunctioning or has failed.
These are the codes that were used: (tS, tE, t5, tCS, tC, tO, t0, 1tC5,tE3, tC5, 1 tC, 1tCS).
Any of the following codes on your Samsung dryer indicate that the lint screen or the vent system is clogged, which is causing heat to be trapped inside your dryer and causing it to overheat.
Depending on the nature of your problem, cleaning the lint system or the vent may be necessary, or you may choose to do so in combination with cleaning the other two.
Error Codes for a Button That Has Jammed
If the panel identifies a button that has become stuck or that has been constantly pressed, the following error codes will appear (bE, bC2, bE2, 6E, 6C2, 6E2).
If your dryer displays any of the following problem codes, you will need to first turn it off and then press each of the buttons on the control panel individually to allow them to be removed from the panel.
In doing so, make certain that you reach the edges of each button on the way down.
After that, you can turn on the dryer and check if any of the codes come back.
If they do, you will need to contact Samsung to have them look into the problem.
Error Codes in the Heating System
The following error codes are likely to be shown if your Samsung dryer becomes overheated on a number of occasions (HC, 1 HC, hE, HC4).
This mistake is most likely caused by a blocked dryer vent or lint screen system that is trapping heat in the dryer.
To remedy this error, all you have to do is clean the vent system or the lint screen; you may even clean both if you want to be absolutely certain that the problem has been resolved.
Codes for Communication Errors
These error codes will be shown when the internal components of your dryer are unable to interact with one another (AC, Et, EEE, AE, AE4, E3, AE3, AE5, 1 AC).
Moreover, to get rid of the error code, all you have to do is turn off the machine for approximately 60 seconds before turning it back on.
Codes for Voltage Errors
If the voltage that is being supplied to your dryer is not normal, your dryer will notify you by displaying one of the error codes listed below (9C1, 9E1, 9E, 2E,).
To get rid of the error codes listed above, make sure that your dryer is not operating on an extension code and is instead operating on its circuit.
Individuals who use electric dryers must make certain that the power cord is properly installed and that the device is receiving the proper voltage before utilizing the appliance.
How to Fix a Samsung Dryer That Won’t Stop Spinning: Causes and Solutions
First and foremost, it is critical to discover the source of the problem before proceeding with troubleshooting your Samsung dryer.
Typically, this type of issue is caused by a simple trip in one of the components on the circuit board, and it can be readily corrected by just resetting the circuit board.
First and foremost, do not be concerned if your Samsung dryer does not switch off.
You do not need to be concerned that your machine is experiencing any type of electrical problem that could be dangerous.
In addition, when dryers malfunction in this manner, they typically continue to tumble but do not emit heat as a result.
This is more of an irritation than anything else, but there is no need to be concerned that it will lead to any sort of more serious or dangerous situation.
To gain access to and reset the circuit board on your dryer, you must carefully follow the instructions outlined below.
Before you begin, you will require either a power drill or a Phillips screwdriver to complete this project.
Disconnect the dryer from the power source
First and foremost, unplug your dryer from the power source for your own safety before beginning this troubleshooting procedure.
You will also be working on the rear of the dryer, so move your dryer a few feet away from the wall to make it easier to reach the back of the dryer.
Remove the Dryer Control Panel by unscrewing it
You will then need to locate two screws on the rear of your dryer that will connect the control panel on the top of your appliance.
Remove the screws from their sockets with a drill or screwdriver and set them away.
After removing the screws, the control panel will fold forward, allowing it to be removed from the top of your washer.
There are a few small tabs that connect the control panel to the base of the dryer, and you will need to move them about a little bit.
This will allow you to gain access to the circuit board that will be covered while you are working on it.
Remove the Circuit Board Cover from the board
In most cases, after you have taken out your control panel, the circuit board cover will be placed on the left side of the dryer.
It will appear as a roughly 8-inch-square box on the screen.
At the bottom of the lid, there will be two tabs that can be simply removed to release the box and reveal the PCB, or printed circuit board, within it.
Unplug all of the cords
Following that, you will unplug all of the components from the printed circuit board.
There will be approximately half a dozen different colored cables connected to the board.
These should all be unplugged in any sequence, and in no particular order.
The PCB will be connected to the control panel by a cord that will be located outside of the PCB.
Remove the cord from the wall as well.
These cords will be equipped with a tab that must be pressed in order to release the cord from the socket. Pulling the cords without first securing them will result in damage.
Examine the cords for signs of wear and tear
After all of the cords have been unplugged, carefully examine them for signs of damage, especially if your laundry room is particularly damp.
Depending on the amount of rust present, there is a considerable potential that your dryer will not turn off properly, and you may be required to repair the PCB and connections.
If, on the other hand, your cables look to be in fine shape, simply plugging them back in should resolve your issue.
Reconnect all of the cords
You will now rejoin all of the cords, as long as none of them have been damaged.
This can be done in any order at this point.
Make certain that all cords are properly secured back into their respective circuits.
The cords and circuits will be color coordinated so that you can be certain that they are reconnected to the correct location after they have been disconnected.
Reassemble the PCB cover and the Dryer Control Panel if necessary.
The PCB cover will be reattached after all of the cords have been reattached to their proper locations.
Replace the control panel on the dryer by first putting it into the machine and then screwing it back into place with the screws that were previously used to secure it. Finally, make sure your dryer is connected to a power source.
Other Tips for Troubleshooting
It is possible that a basic reset, such as removing your dryer from its power supply for 10-15 seconds and then plugging it back in, will be successful before attempting to reset the entire circuit board on your dryer.
Additionally, it is always advisable to perform routine maintenance and cleaning of your dryer.
In order to accomplish this, you should always empty the lint filter, vacuum out your dryer, clean and upgrade your vent hose as needed, and clean the external dryer and exhaust vents on a regular basis.
Also, be certain that the loads you are undertaking are of sufficient size and that you are not overloading your equipment.
Performing this type of routine maintenance and care on a regular basis will hopefully prevent future problems with your dryer.
How To General Reset Your Dryer?
Many dryers have a reset button on the control panel, which can be used to restart the machine.
1. Allow the dryer to cool for approximately 10 minutes if the motor would not start.
2. After that, press the reset button. If there are no problems with the motor, switches, or electrical system, this should be sufficient to restart the drying machine.
Aside from that, how can I perform a diagnostic on my Samsung dryer?
- Perform a vent blockage test to determine the cause of the problem.
- Check to see that the drum is empty before closing the door.
- Turn on the dryer by pressing and holding the POWER button for 5 seconds, then press and hold the Adjust Time Up + Dry Level button until InS or In shows on the display.
- To begin the Vent Blockage Test, press and hold the START/PAUSE buttons for about 2 minutes to initiate it.
A second inquiry concerns if the Samsung dryer can be re-programmed.
You might try unplugging the dryer for 5 minutes and then plugging it back in to see if that helps to reset the control board.
This can be useful if the control board has been stuck as a result of a power surge or glitch that it has encountered while operating on the electric supply lines.
What caused my Samsung dryer to quit functioning?
If the switch does not provide continuity, it should be replaced.
The driving motor rotates the drum and the blower wheel, which exhausts the air via the system.
Before replacing the motor, make sure that the thermal fuse, the start switch, and the door switch are all working properly.
It is possible that the switch will fail and the dryer will lose power, even though the belt is not broken.
Our Final Thoughts
There are times when your Samsung dryer may be experiencing more serious issues, and resetting and troubleshooting will not be enough to get it back to working properly; in this instance, you will need to contact the Samsung support department.
Because if you make numerous unsuccessful attempts to clear the error codes, you will simply make it more difficult for the expert to diagnose the problem because you will have erased the history of error codes.
Frequently Ask Questions
What is the best way to reset my Samsung washing machine?
The process of resetting your washer is distinct from the process of resetting your dryer. You can find detailed instructions on how to reset your Samsung washing machine in a separate tutorial.
What is the procedure for resetting the motherboard on my Samsung dryer?
Resetting your dryer is a simple process. It’s best to unplug it (or turn off the power at the circuit breaker), wait a short period of time for the electrical charge to clear out of the dryer (typically 1 to 5 minutes at the most), and then plug it back in. That’s all there is to it. That’s all it takes to restart your computer.
What is the location of the Samsung dryer's reset button?
The reset button is located on the control panel of the unit.
Hi, I'm Khelly! Your random Island Girl! Life is complicated so, finding solution to your tech problems shouldn't be. Let me help you with that!????
Dryer not working display samsung
Why is my samsung dryer not turning on?
The thermal fuse is a safety device designed to protect the dryer from overheating. The fuse is located on the blower housing or at the dryer’s heat source such as the heating element on electric dryers or at the burner on gas models. The fuse should be closed for continuity meaning it has a continuous electrical path through it when good. If overheated the fuse will have no continuity meaning the electrical path is broken and the fuse has blown. A multimeter can be used to test it for continuity. Be aware that a blown thermal fuse is an indication of a restricted exhaust vent from the dryer to the outside. Always check the dryer venting when replacing a blown thermal fuse.
To determine if the start switch is defective, attempt to start the dryer. If the dryer hums but does not start, the start switch is not at fault. If the dryer does not respond or make any noise, the start switch could be at fault. Use a multimeter to test the start switch for continuity. If the switch does not have continuity, replace it.
The door switch activates when the dryer door is closed. On most dryers, the door switch makes an audible clicking sound when it activates. To determine if the door switch is working, try starting your dryer and then listen for the “click.” If the door switch makes a clicking sound, it is probably not defective. If you don’t hear a click, use a multimeter to use the door switch for continuity. If the switch does not have continuity, replace it.
Was this answer helpful?
Samsung dryers are a worthwhile investment. They are super quiet, ideal for drying wrinkling fabrics, easy to use, and have a sanitization feature. So much so that when your dryer stops working or malfunctions, you are left in a bind.
While you can call a professional to troubleshoot it or contact the Samsung support center, figuring it out is super easy if you have a troubleshooting guide.
How do you reset a Samsung dryer?
When your dryer stops working, it displays an error code. Your first instinct is to reset it in most cases to try and fix it. Contrary to popular belief, this is not the ideal way to fix your dryer. In most cases, the reset may work, but in other cases, additional troubleshooting is necessary.
Resetting your dryer may clear error codes, but it will not help fix issues such as a blocked vent or a worn-out drive belt. Additionally, when the dryer is still not working, clearing all error codes will make it difficult for your technician to figure out what is wrong with the dryer.
So when should you reset your dryer?
- In case of an electronic glitch caused by a power outage
- After fixing a malfunction to clear an error code
- When you are unable to select settings for different features
The resetting process;
All you have to do is unplug the dryer or turn off the dryer’s power and wait for the electrical charge to clear out of the dryer. This should take 1-5 mites. Then plug the dryer or turn on the power and proceed to restart it.
Network reset process
This step helps to clear Wi-Fi and network information stored on the dryer control board. It only works for dryers that are Wi-Fi compatible.
- Hold the Smart Control button until AP appears. This will only take three seconds.
- Then press the Temp button for about 7-seconds until OK appears.
- The display will automatically go to AP.
- Then turn off the dryer.
Where is the Samsung dryer reset button?
Samsung dryers do not come with a reset button. The reset process above applies to all Samsung dryers.
Why is my Samsung dryer making noise?
Samsung dryer noises fall into four main categories depending on the issue;
This could be a result of the uneven placement of the dryer. Level the dryer by placing it on even ground and adjust the feet if some of them are loose. Then check if the exhaust vent is loose and fix it as this may be another cause of the rattling noise.
Also, check to see that the vent is not coming into contact with the power cord, as this may also cause a rattling noise. Lastly, check to see if there are any loose objects in the drum, such as pens, coins, or buttons.
Thumping or rumbling noise
This could be a result of dryer overload. It could also be caused by items such as buttons, zippers, or snaps touching the dryer drum interior while it is running. Ensure you do not overload your drum or place the zipper or buttoned edges of your clothing against the drum walls.
If the dryer makes a thumping noise when it is empty, call a professional to look at it.
Grinding, squeaking, or squealing noise
The main reason for these sounds is a heavy drying load. Stop the cycle and reduce the number of items in the dryer. It would help if you also ran the clothes through a spin cycle to reduce the excess water before drying them.
This is a typical sound, but a loud humming sound could indicate that the air vent is blocked.
Troubleshooting noises based on damaged or worn out dryer parts
Inspect various parts of the dryer to see if they have issues and fix them. These include;
This is a long belt that wraps around the dryer drum, tension pulley, and the drive’s motor. The drive belt is responsible for turning the dryer drum, which helps to tumble dry your clothes. If it is damaged or frayed, the drum dryer may wobble, causing it to be noisy. To fix this, you need to replace the drive belt.
These work in tandem with the drive belt to help turn the dryer drum. They are usually located at the back of the drum. But some dryers have additional rollers in front of the drum. If your drum’s rollers are worn out, the dryer drum may make a rumbling noise similar to a rolling drum due to the lack of proper support when turning.
Replace the rollers if they are worn out. In some cases, all you need to do is clean them as well as the roller shaft. Once you have done this and the noise persists, then proceed to replace the drum rollers.
Drum roller axle
This axle helps the drum roller to turn and may wear out over time due to friction. When this happens, the drum will rattle when turning, causing it to make a noise. To test if the roller axle and rollers are worn out, remove the drive belt and turn the drum manually.
If the drum does not rotate freely or requires force, then the rollers and axle are worn out. Proceed to inspect them and replace the roller axle as needed.
This helps to draw air from the dryer into the dryer vent. At times it gets clogged by lint, socks, or small clothing causing it to become blocked. This may result in muffled noises caused by the clogging. Additionally, the blower wheel may begin to wobble if the blower wheel sleeve is worn out.
Check airflow strength coming out of the dryer vent to determine if the blower wheel is functioning correctly. Then check for obstructions and remove them. If the issue persists, replace the blower wheel.
When your drum bearings are worn out, the dryer will make squealing and grinding noises. Additionally, when you turn the drum manually, it will be challenging to turn. The drum bearings are responsible for supporting the fryer drum at the rear. Replace them if they are worn out.
Drum Slide, Glide, or Pad
The drum slides support the front of the dryer drum and are usually made of plastic. The drum slides may wear out, causing the dryer to make a noise as the drum rotates. Inspect them for wear and replaces them as needed.
Idler Assembly and Idler Pulley
Inspect the idler assembly and the pulley for wear and tear and replace them if needed. For best results, replace the drive belt as well, as they all work in tandem, and you may still need to replace the belt at a later day.
Drive motor bearings
This should be your last stop after you have inspected all the other parts listed above and find they are all functioning okay. Fidgeting with your dryer’s motor can lead to significant malfunctioning, so be careful when inspecting and replacing the bearings if they are worn out.
If all the other parts are working fine and your dryer still makes noises, then the drive motor may be broken. Look for a professional to replace the drive motor as this is the heart of the dryer, and poor installation may damage your dryer. Solution
Samsung dryer troubleshooting codes: error code list, their meaning, and fixes
Error codes are essential for identifying the underlying issue. Fortunately, most problems with an error code are easy to fix. Here are the Samsung dryer error codes;
Voltage errors (9C1, 9E, 2E, 9E1)
This code appears when the voltage being supplied to the dryer is not enough or too high. Ensure the dryer is on its circuit and not using an extension cord. Also, make sure the power cord has been installed correctly, and the correct voltage is being supplied.
You may get this error if you have a dryer model designed for use in a different country, as power grids and their regulations vary between countries.
Jammed button errors (bE, bE2, bC2, 6E, 6E2, 6C2)
This appears if a button on the panel is detected as stuck or continuously pressed. Power off the dryer and then individually touch and release every button on the panel, working back and forth to reach all edges of each button.
If any of the buttons are damaged, or the code returns after powering on the dryer, hire a certified professional to fix the dryer or contact Samsung Support Center.
Door-Related errors (DC, dE, dF, do, d0, 1 DC, 1 dF)
These are related to the door, latch, and the sensors that detect whether they are secured correctly. This usually happens when the door won’t stay closed or won’t close or latch.
Check that the latch is securely fixed, laundry or other items are not caught in the door, and the door is closed and secured correctly. If the code persists or damages the door or latch, hire a certified professional to fix the dryer or contact Samsung Support Center.
Temperature errors (tS, t5, tC, tO, t0, tE, tE3, tC5, tCS, 1 tC, 1tC5, 1tCS)
These reflect an issue with the temperature or with the sensors that measure it. The most common cause is a clogged lint screen or vent system trapping heat in the dryer. Clean the lint screen, vent system, or both to correct the error.
If the error continues after cleaning the lint screen and the exhaust vent, hire a certified professional to fix the dryer or contact Samsung Support Center.
Heating errors (HC, hE, HC4, 1 HC)
This means that the dryer is getting too hot. The primary cause of this is a clogged lint screen or vent system trapping heat in the dryer. Clean the lint screen, vent system, or both to correct the error.
If the error continues after cleaning the lint screen and the exhaust vent, hire a certified professional to fix the dryer or contact Samsung Support Center.
Communication errors (AC, Et, AE, EEE, AE4, AE3, AE5, E3, 1 AC)
This code means the dryer’s internal components cannot communicate with each other. Shut off the dryer for 60 seconds, and then turn it back on again. If the error code remains, hire a certified professional to fix the dryer.
Frequency errors (FC, FE, 1 FC)
These codes mean that there is an invalid power source frequency. To fix this, try restarting the cycle. If the error code remains, hire a certified professional to repair the dryer or contact Samsung Support Center.
All other errors
If the dryer displays an error code that was not on the list, the error usually indicates an issue with the dryer’s sensors and components.
Here are some examples:
- 3C – Motor Error
- oD – Dry Time Error
- 1 AC7 – Electronic Control Error
- HC2 – Gas Ignition Error
If you get one of these errors, or any other errors, power off the dryer for 2-3 minutes, power it back on, and restart the cycle.
If this doesn’t work, try checking your user manual for exact troubleshooting steps. If you see something that looks like an upside-down “F,” it’s meant to be a “t.” Please refer to the Temperature errors. If the error returns, hire a certified professional to fix the dryer or contact Samsung Support Center.
Samsung dryer red light flashing
The flickering dryer light can be normal or not, depending on the flicker’s length and the color intensity of the flicker. Here are some light signals that indicate an underlying issue and what they mean;
Extra Low or 20-minute light is blinking – Frequency errors
Either of these codes means that there is an invalid power source frequency. Restart the cycle, and it should reset. If the error code remains, hire a certified professional to fix the dryer or contact Samsung Support Center.
Low light is blinking – Jammed button error
This appears if a button on the panel is stuck or continuously pressed. Power off the dryer and then individually touch and release every button on the panel, working back and forth to reach all edges of each button.
If any of the buttons are damaged, or the code returns after powering on the dryer, hire a certified professional to fix the dryer or contact Samsung Support Center.
Medium is blinking – Communication error
This means the dryer’s internal components cannot communicate with each other. Shut off the dryer for 60 seconds, and then turn it back on again. If the error reappears, hire a certified professional to fix the dryer or contact Samsung Support Center.
High light or 40-minute light is blinking – Door-related errors
Either of these lights blinking means there’s an issue with the door, latch, or the sensors that detect whether they are secured correctly. Check that the latch is securely fixed, laundry or other items are not caught in the door, and the door is closed.
If the code cannot be corrected or there is damage to the door or latch, hire a certified professional to fix the dryer or contact Samsung Support Center.
60-minute light is blinking – Heating error
This means that the dryer is getting too hot.
The most common cause is a clogged lint screen or vent system trapping heat in the dryer. Clean the lint screen, vent system, or both to correct the error.
If the error continues after cleaning the lint screen and the exhaust vent, hire a certified professional to fix the dryer or contact Samsung Support Center.
80-minute light is blinking – Voltage error
As with the error codes listed above, ensure the dryer is on its circuit and not using an extension cord. Also, make sure the power cord has been installed correctly, and the correct voltage is being supplied.
You may get this error if you have a dryer model designed for use in a different country, as power grids and their regulations vary between countries.
If the error continues, hire a certified professional to fix the dryer or contact Samsung Support Center.
Any other lights are blinking
Blinking lights do not always mean an error code. On some models, the current status of the cycle will blink. Before assuming that blinking lights mean an issue with the dryer, check to see if the dryer is experiencing any other problems or symptoms of any kind.
If the dryer is experiencing any other issue, search our support content for an article that addresses the dryer’s problem to troubleshoot it directly. Otherwise, if your dryer is working, no action is needed.
Samsung dryer Thermal fuse burnt out
A thermal fuse is a built-in safety component of any electrical gadget. The purpose of the thermal fuse is to prevent fires. Dryers have an upper limit temperature cutoff designed to prevent the dryer from causing a fire accident.
This upper limit temperature is usually slightly lower than the thermal fuse’s burnout temperature. On top of the three thermostats installed in the dryer, the thermal fuse acts as the final defense line when overheating occurs.
In most cases, dryer overheating is usually a result of a blocked air vent. This means all hot air remains trapped in the dryer, causing it to overheat rapidly, especially if it is operating at maximum heat.
Should the thermostats fail to regulate the temperature, the excess heat will ultimately cause the thermal fuse to blow. Check the blower wheel to ensure it is not broken or clogged. Then remove ling build-up in the drum’s rears and the dryer vent. Then replace the broken fuse and the dryer thermostats.
How do I run a diagnostic on my Samsung dryer?
The Vent Blockage automatically detects and reports any blockages or problems affecting the dryer’s exhaust ducts. You should run this test when the dryer is installed and ensure your dryer vents and ducts are lint-free every once in a while.
However, not all Samsung dryer models have this feature. You can confirm whether your dryer has this feature by looking at the user manual.
How to run a Vent Blockage Test
- Let your dryer cool down fast if you have just used It before running the test.
- For your first vent test immediately after installation, run the AIR FLUFF cycle first for a few minutes to reduce internal temperature.
- Ensure the dryer drum is empty as the test will not give accurate results if it has laundry. Then close the dryer door.
- Press the power button, then press and hold the Adjust Time Up + Dry Level until InS or In appears on display.
- In some dryers, you may have to press Cycle 1 + Wrinkle Prevent or Air Fluff + Wrinkle Prevent button combinations until InS or In appears on display.
- Then press the START/PAUSE button to start the vent blockage test. It typically takes 2 minutes.
- Do not open the dryer door while performing the test. If the door is open, “dc” will appear on display.
- The results will be displayed once the test is done.
- “0” or “End” means the dust system is normal, and you should hear a completion chime if the ductwork is okay. You should still clean your exhaust vent at least once or twice a year.
- If the duct system cannot exhaust properly, you will see “CLg” or “Cg” on display and hear an alarm chime. This means you need to clean your dryer’s exhaust vent.
- If “C1” or “CL1” appears, check for laundry inside the drum. Remove the laundry and then rerun the test.
- The results will remain on display for about 5 minutes. You can press the POWER button to turn off the dryer and remove the vent test code. Or wait for the dryer to turn off automatically after the 5 minutes have passed.
Running a vent Blockage test manually.
Older Samsung dryer models do not adjust the heat when the vent is clogged. If your dryer gets extremely hot after a long cycle time, chances are its vent is clogged. Lint build-up is a fire hazard which is why you should clean your dryer vent once or twice per year.
Clean vents will also make your dryer work better, leading to energy savings and shorter drying time. Newer Samsung dryers reduce heat when there is a blockage. If your dryer does not have the in-built blockage test, check your vents for blockage if the dryer appears to be emitting lower heat than set.
For the manual vent test, disconnect the exhaust vent from the dryer and run a Time Dry cycle for at least 30 seconds. (Ensure the Eco Dry setting is turned off if your dryer has this feature.) then feel the hot air inside the drum.
If the dryer is hotter with the vent off, then the exhaust vent is clogged and needs to be cleaned, or it is the wrong vent for your dryer. If your dryer is still emitting low heat after this or not emitting hot air, then there could be another issue.
Why will my Samsung dryer not turn on?
This could be a result of a tripped breaker or a loose power cord. In layman’s terms, the electric current signal has been interrupted somewhere. Open the dryer door to see if the drum light will turn on.
If the drum light doesn’t come on when you open the door, check the outlet (this applies to gas dryers only). Plugin another electronic device to see if the outlet is working. If the outlet is not working, hire a licensed electrician to fix it.
- Electric current troubleshooting
Always turn off the dryer’s circuit breaker before you start troubleshooting.
- Turn off the breaker and unplug the dryer.
Inspect the plug, cord, and outlet for burn marks and damage. If you see any burn marks or damage, hire a licensed electrician to repair the damage.
- Check if the circuit is tripped.
Wait 30 seconds, plug the dryer back in, and switch the breaker to On. Then use a multimeter to see if the current is being transmitted. Gas dryers need 15 amps, while electric dryers need 30 amps. If the circuit is tripped, consult an electrician.
Why is my Samsung dryer not drying my clothes?
Clothes not dry at the end of the sensor dry cycle
This means the dry level is too low. Adjust the dry level to a higher setting, especially when drying heavier garments like jeans or suede coats. Also, avoid mixed loads with fabrics of varying densities. Dry jeans and lighter items such as t-shirts separately.
This is because they have different drying times. The sensor will sense the t-shirts are dry and end the cycle before the jeans are dry. Also, spin your clothes to remove excess water before drying them. You should also select a longer drying time for heavier items such as a comforter to avoid damp spots.
Drying too few clothes at a time will also not get detected by the sensor. Add a minimum weight as directed in the user manual for effective drying. Lastly, check to see if the vent is clogged as the excess heat may trigger the sensor before the clothes are dry.
The dryer is not heating enough or at all.
This means that the vent is clogged, and the dryer automatically reduces the heat level, causing your clothes not to dry properly. Clean the vent and restart the drying cycle. Alternatively, your moisture sensor may be dirty, thus the lack of heat emission. Clean them to see if the issue will get fixed.
Here are other reasons your dryer is not producing enough heat;
- You have selected a cycle that is designed to run without heat, such as Eco Dry.
- Your dryer may have tripped its circuit. In this case, hire a licensed electrician to fix it.
If your dryer has just been installed and is not producing heat, there may be an installation issue. Review the installation and ensure everything was connected according to dryer requirements. Have a professional review the installation if you cannot figure out what’s the issue.
The dryer takes too long to dry or is not hot enough
Start by cleaning the lint filter as excess lint may be causing the dryer to retain water that is misguiding the moisture sensor. The Sensor Dry cycle is designed to run until the clothes are dry, however long that takes. If it’s taking a long time for them to dry, the most common reason is that moisture isn’t able to leave the dryer.
If this does not help, inspect your vent. A clogged vent also prevents steam from escaping from the dryer, which in turn causes the sensor to keep the dryer running. It also causes heat to get trapped, which may cause the dryer thermostats to reduce drying temperature.
Also, ensure your vent is not folded or performing poorly. To do this, you can run a vent blockage test. And clean or replace the vent if it is made from the wrong material.
Another option is to turn off the Eco Dry setting as it reduces heat output to save energy. The beginning of the cycle doesn’t use any hot air at all. This results in longer cycles, but it reduces energy consumption.
Lastly, heavier loads such as comforters will have longer dryer time, and rightly so. Bear this in mind when selecting the drying time for heavier loads. Also, avoid overloading the dryer when drying heavier fabrics and garments.
Note: If you run a vent blockage test and you get a Normal result, but the dryer is still malfunctioning, hire a certified professional to fix the dryer or contact Samsung Support Center.
Samsung dryer turns on or is humming but doesn’t spin
This is indicative of an underlying issue, and chances are, dryer maintenance will be required. First things first, check to see if the child lock is preventing the dryer from spinning. The Child Lock feature stops the Start button from working, so if you’re trying to start a cycle and the drum won’t spin, it could be Child Lock.
You can check by looking to see if the icon is lit. The Child Lock icon looks different in different dryer models. It may look like a baby or a lock with a smiley face. Follow manual instructions and turn off the child lock. If the child lock feature does not turn off, unplug the dryer, wait for 60-seconds and turn it back on.
Then check to see if it has an error code and refer to your user manual to see what the error code means. If this does not work, do a cycle check by performing the Time Dry test. Select Time Dry, and then touch and hold Start. If the timer counts down even though the drum isn’t spinning, it is time to get your dryer serviced.
Samsung dryer thermal fuse replacement guide
Once you realize your thermal fuse is broken. You are going to have to replace it before using the dryer again. The thermal fuse is essential as it protects your dryer from a potential fire hazard. Make sure you purchase the recommended thermal fuse for your dryer model. Only buy replacement parts from the manufacturer or genuine dryer parts sellers.
Here are the steps for replacing a thermal fuse;
Unplug the dryer or flip the circuit breaker
Always unplug your dryer before you start working on it. This will protect you from being shocked.
Disassemble the dryer
Then push the dryer away from the wall so you can access the back. Loosen the two screws at the back of the top panel’s edge and remove the top panel. Remove the control panel by carefully separating the top of the panel from the tabs along the control panel’s back.
Tilt the panel forward and remove it. Carefully set it on top of the machine and not tug the wire harness on the right side. Then remove the front panel and make sure you store the screws safely to avoid losing them.
Remove the heater element assembly
Disconnect the moisture sensor in the bottom right corner and part the wires so you can see the heater element assembly and lower bracket behind it. Then remove the lower bracket by unscrewing it. Remove the lower bracket and disconnect the heater element from the rear duct and remove the heater assembly.
Uninstall the thermal fuse
Place the thermal fuse on the dryer. Remember, it is still connected to the dryer, so do not tug on it too hard. Unscrew the wire connections and take pictures so you can reconnect them with ease once you are done.
Then unscrew the thermal fuse bracket and remove the thermal fuse. The fuse will be riveted into the small bracket so prepare to drill out the rivets. Then pull the old fuse out of the bracket.
Replace the thermal fuse
Install the fuse into the bracket while it is still clamped. Then rivet the new fuse using a pop gun. Then reassemble the heater assembly and reconnect the wires.
Reassemble the dryer’s internal and external parts.
Then reassemble the other parts of the dryer, working backward from the last piece you took out up to the first one. Ensure you have installed everything correctly and close the dryer up as it was before you begin the fuse replacement process. Then plug it in and turn it on to see if it is working.
If this process is too tedious for your liking, hire a certified professional to replace the thermal fuse.
Note: A broken thermal fuse is a warning that there is another issue. So make sure you troubleshoot and fix the other problem. Or your new thermal fuse will also break once you start using the dryer again.
The dryer won’t turn off.
It is usual for your dryer’s drum light to stay on even after you turn off the dryer. Especially in newer models, and it will automatically turn off by itself after a few minutes. However, if the drum won’t stop spinning or the panel won’t turn off when you press Power, something is off.
Start by checking to see if Wrinkle Prevent is enabled. If the feature is enabled, the dryer will keep spinning without heat and stop once you open the door.
You should see the END displayed once the cycle ends until the door is opened. The dryer will also play a sound indicating that the cycle is done. If the message does not go away or the dryer won’t turn off or stop spinning, try pressing Power.
If this does not work, unplug the dryer or turn it off at the outlet and then plug it back on or turn it on, respectively. If the dryer keeps spinning or does not turn off, hire a certified professional to fix the dryer or contact Samsung Support Center.
Control board motor relay stuck in on position.
When the relay is stuck in the “ON” position, it ignores the control board’s signal. As such, when you shut the dryer door, power still flows to the motor through the door switch. To determine if the motor relay is stuck, you need to unplug the dryer and inspect the relay switch manually.
Pull the dryer from the wall as you will need to access the rear. Then unscrew the control panel and inspect the control board to see if the relay has melted. If you see burn marks on the metal panel, then the relay switch is burnt, and it needs to be replaced.
Your two options would be to replace the switch, which requires a bit of soldering. Or you can replace the entire control board, which can be relatively expensive, complex, and time-consuming. If you are not able to handle these tasks, hire a certified professional to fix the dryer or contact Samsung Support Center.
Samsung dryer keeps running even after the clothes are dry
If your dryer keeps running after your clothes are dry, chances are the moisture sensor is not working correctly. Check to see if the moisture sensor is dirty or obstructed. At times smaller pieces of clothing such as socks may prevent the sensor from working correctly.
Also, check to see if they are covered in lint and clean the sensor bar using a Q-tip or cotton swab and rubbing alcohol. Also, check if you set a more extended drying period than was necessary. A Manual Dry cycle will keep running even after the clothes are dry.
Lastly, check to see if Wrinkle Prevent or Wrinkle Release is enabled as this feature keeps turning the drum with no heat to prevent clothes from getting wrinkled. If your dryer is on Wrinkle Prevent mode, a scrolling rectangle will be displayed on the panel.
Check this too: Whirlpool Dryer Troubleshooting & How to Guide
If the dryer keeps running even when you remove the clothes or disable the wrinkle prevent feature, then hire a certified professional to fix the dryer or contact Samsung Support Center.
Samsung dryer not working: Filter check
It is essential to remove ling build-up from your filter for your dryer to operate optimally. If your filter light is blinking when you turn it on, you should clean your dryer before using it. Ideally, you should remove lint from the lint screen before drying a new load of laundry.
Here are the necessary steps perform a filter check if the filter light is not blinking, but the dryer is still acting up;
Electric Top-Load Dryer Filter Check
- Open the dryer door to locate the lint filter.
- Then grab the Lint Filter Handle and pull the lint filter out of the dryer.
- Open the lint filter cover and discard the lint. Then replace the lint filter.
- Ensure you insert it in the correct direction when replacing it.
- Close the dryer door to proceed.
- Press the Start/Pause button to restart the dryer. The Filter Check display will automatically turn off.
Samsung dryer Wrinkle Prevent is not working.
Check to see if the Wrinkle Prevent or Wrinkle Release is disabled and enable it following the instructions in your dryer’s user manual. If the function does not work even when enabled, hire a certified professional to fix the dryer or contact Samsung Support Center.
- Lg got your laundry
- Love bites lyrics
- 28 33 inch bar stools
- Glitter nail design
- Iowa test results 2020
- Used stroller for sale
- Polaris general 4 cover
- Creative fabrica freebies
- Fujifilm x t3 specs
- Is slushpool legit
- Neff beautiful living
- House cleaning rapid city
Why is Your Samsung Dryer Not Working and Drying the Clothes?
Dryers are among the most useful appliances in the home. Once they stop working, though, they are rendered redundant until you fix the underlying faults. While the Samsung brand is widely accepted as one of the most reliable for long-term usage, they are still vulnerable to wear and tear. Left untreated, clothes will be left wet and smelling. Before considering a replacement, though, you should know that a variety of quick-fix dryer repair services may correct the damage. This guide will help you with most Samsung models, including:
Symptoms of a Samsung Dryer Not Working as it Should
Is your Samsung dryer taking too long to dry clothes despite the fact it powers up and runs a cycle? The following symptoms are likely to occur:
- Dryer not heating.
- Dryer drum not turning.
- Dryer has a burning smell.
- Odd operational sounds.
- Clothes feel wet or smell.
Check the Error Code
If your Samsung Dryer is not working due to a mechanical fault, the on-board computer should detect it and inform you of the problem by displaying the error code. If this happens, your first step is to check it in the manual or via Samsung’s help center. This will provide clarity as to the severity of the issue and whether you need to call a professional repair service.
Test for a Vent Blockage
Most of the newer Samsung dryers boast blockage test capabilities from the control panel. If yours does, you should run the test before checking any other elements:
If a blockage is found, this is the chief reason for a lack of warmth. Clean the outside hood and the inner exhaust vent before running the test once more. If the new test shows a problem, finding a replacement vent that corresponds to your model should correct the issue.
If your Samsung dryer does not include this feature, you can disconnect the vent manually before running a cycle for one minute. Then open the drum to see if it feels hotter than it did before, you will need to thoroughly clean the vent before reattaching it.
Test Tripped Circuit Breakers
Like many brands, electric Samsung dryers have two breakers. While they should be connected in a way that means they’ll trip simultaneously, it is possible for only one of them to break. When this happens, the dryer will spin without producing heat.
You can complete a manual reset by turning the circuit off for one minute before switching it back on. Following this, start a cycle for 30 seconds on Time Dry before opening the door and putting your hand inside. If you can feel a little heat, your problem should be fixed.
Check The Socket Fuse
It’s very unlikely but if you’ve changed the plug and do not have enough voltage, the Samsung dryer won’t run properly. The heating function will naturally be the first to suffer should this occur. It’s not an applicable issue to many people, but it could be the source of problems in a small number of cases.
Change the Mode Settings
When running a cycle with a combination of heavy and light materials, the Mixed Load Bell/Damp Alert setting (depending on the age of your Samsung dryer) is designed to combat the issues caused by lighter items drying more quickly. Turn it on, and you’ll receive a notification when the load hits 80%. This enables you to remove the dry items and allow the final pieces to dry normally.
Similarly, when using a Sensor Dry cycle without gaining the desired results, simply increase the setting to a higher Dry Level and you should notice a significant improvement.
Check the Moisture Sensors
The moisture sensors are two bars inside the Samsung dryer that are usually found in the lint filter housing. They serve to detect wet clothes inside the cycle, which will tell the dryer to initiate or maintain the drying cycle. So, if they are obstructed by residue, the machine may not heat or will turn off the heat prematurely. Cleaning the sensors with a little soap and a soft cloth may fix the issue.
Overfilling the dryer is naturally problematic and can prevent clothes from drying. However, an overly small load will also result in the dryer not heating because the moisture sensors will not detect enough damp clothes to switch the heating elements on. Either wait until the load is bigger, or add a couple of wet towels to combat the issue.
Check the Lint Filter & Drainage
While checking the drum, the lint filter should be changed. This is where the majority of moisture will collect, and too much of it will prevent the machine from working properly as the moisture won’t be able to leave the dryer. The lint filter should ideally be changed after every cycle to avoid accumulated moisture.
Similarly, the drainage should be checked. If the Samsung model has a drainage hose, you must check that it is installed properly and not submerged by water. Meanwhile, internal water tanks should be changed every 1-2 cycles.
Test the Thermostat
A faulty thermostat will stop the dryer from receiving enough hot air to adequately dry the clothes. Using a multimeter will allow you to test the performance of the thermostat and determine whether a replacement thermostat is required when your Samsung model is not working.
Overheating can cause the heating fuse to become faulty, which will result in a spinning drum without heat. The multimeter test will determine problems with this part of the dryer’s heating mechanisms too.
Check the Heating Element
If thedryer has a burning smell, the heating element may be burnt out. Poor maintenance will encourage this to happen far sooner. The heating element is usually found behind the front panel. Turn off the machine and access it by removing the control panel and front panel. A visual inspection should quickly confirm your suspicions.
When it is damaged, it’s vital that you respond quickly by replacing it as to avoid escalating damage and possible health hazards. The Samsung heating element can usually be replaced for under $100 (often nearer $50) and changed on a DIY basis.