Cmc barrel review

Cmc barrel review DEFAULT

Fort Worth, Texas: CMC Barrels™ is proud to announce its highly anticipated line of CMC AR Barrels. Since the 2018 inaugural launch of the CMC Glock® Match Precision Barrel, CMC has had the objective of developing a series of high-quality AR Barrels that complement their exceptional line of AR aftermarket products. The CMC Barrels™ AR Barrel line does just that.

With input received from military, law enforcement, and civilian shooters incorporated into the core engineering of their AR barrels, CMC has been able to accommodate the modern-day shooting requirements requested. Every barrel is precision, instrument-inspected for absolute straightness and air gauged for maximum uniformity, yielding the highest accuracy possible. Land and groove tolerance from breech to muzzle can vary only .0001″ for the best concentricity.

The first profiles availed will be based on the SOCOM variant. The CMC’s AR15 barrels are made from 4150 Chrome Moly Vanadium, coated in H&M Blacknitride+™ for increased wear resistance, chambered in .223 Wylde so that you can feed it both .223 and 5.56 NATO ammo. 

CMC’s AR15 Barrels provide a choice of gas system lengths along with M4 feed ramps for reliability, a 1:7? twist rate, 1/2?x28 thread pattern to fit standard AR15 muzzle devices, 11-degree match crown for increased accuracy and a bottom dimple for easy install and alignment of gas blocks. 

CMC AR15 barrels are coated in H&M Blacknitride+™ or Ferritic Nitrocarburizing, resulting in significantly improved surface properties on ferrous metal parts while maintaining dimensional and shape stability. H&M Blacknitride+™ yields increased wear resistance, improved fatigue strength, better corrosion resistance, improved lubricity, and enhanced cosmetic appeal. 

CMC Barrels™ AR15 Barrel Features:
• Optimal length gas systems for barrel lengths
• 1:7″ twist rate
• M4 feed ramps for reliability
• Air Gauged tested for consistency
• 1/2″x28 thread pattern to fit standard AR15 muzzle devices
• 11-degree match crown for increased accuracy
• Bottom dimple for easy gas block install and alignment

CMC Barrels™ AR15 Barrel Technical Specs:
• Barrel Lengths Currently Available: 7.5″, 10.5” and 16.25”
• Barrel Profile: SOCOM
• Barrel Material: 4150 Chrome Moly Vanadium
• Barrel Type: Button Rifled
• Barrel Coating: H&M Blacknitride+™
• Barrel Caliber: .223 Wylde
• Barrel Gas System Currently Available: Pistol, Carbine and Mid
• Barrel Twist: 1:7
• Barrel Extension: M4 Type Feed Ramps
• Gas Block Diameter: .750″
• Gas Block Journal Length: 1.13″
• Muzzle Thread: 1/2-28 TPI
• Testing: Air Gauged
• Weights Currently Offered: 7.5”-1.02 lbs., 10.5”-1.3 lbs. and 16.25”-2.0 lbs.

CMC’s barrels are complimented by their Low Profile AR15 .750 Nitride Finish Gas Block, AR15/10 Nitride Coated Gas Tubes, and Enhanced Bolt Carrier Groups. Like all CMC Barrels™ and CMC Triggers™ products, the CMC Barrels™ Profile Barrel is exceptionally well made, more durable than standard stock barrels, and includes CMC’s Satisfaction Guarantee and Lifetime Warranty.

For more information on the CMC Barrels™ AR Barrel or other products offered by CMC, please visit

This entry was posted on Thursday, March 12th, 2020 at 23:00 and is filed under Press Release, Weapon Accessories. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.


New Glock Barrel Manufacturer: CMC Barrels

Several companies sell after-market Glock barrels stamped with their company logo, but few actually manufacture them. Just months ago, CMC Triggers committed to making precision drop-in Glock barrels by purchasing the needed equipment for in-house operations. Because this is no small feat it isn't surprising that many companies outsource some or all of the manufacturing process.

The new division of CMC Triggers is aptly named CMC Barrels. The first offerings from CMC Barrels will be match precision barrels for the Gen3 and Gen4 Glock 17, 19, and 34 pistols.


G17_T28_Brnz_Side_001 copyG17_T28_Brnz_Top_001 copy

With machining being handled in-house, CMC Barrels said the proprietary processes and quality control inspection allow for an “ultra-precise barrel with enhanced slide fit and lockup for improved accuracy.”

Barrel specs include:

  • 416R Stainless Steel
  • Six-groove cut rifling
  • 1:10 Right-hand twist
  • Double-honed to produce the smoothest bore possible
  • Stress relieved
  • SAAMI, match-grade precision chambering
  • Final hardness of 38-42 Rockwell C
  • Straight fluting for aesthetic purposes
  • Threaded options available for suppressor use

For maximum consistency, accuracy, and quality, CMC Match Precision Glock Barrels feature “finished bore dimensions held to +/-0.0005 inch tolerance from nominal groove and bore dimensions but the dimensions are uniform within 0.0002.”


The bead-blasted, satin finish barrels are available in:

  • Stainless: uniform satin blast finish with ultra-low friction hBN (Hexagonal Boron Nitride) bore and chamber
  • Bronze TiCN: with ultra-low friction hBN (Hexagonal Boron Nitride) bore and chamber
  • Black DLC: with ultra-low friction hBN (Hexagonal Boron Nitride) bore and chamber

The drop-in barrels do not require a gunsmith for installation. The first production runs will be in store in December 2017.


Expected pricing:
Glock 17, 19 Threaded Fluted, MSRP $210
Glock 17, 19 Non-Threaded Fluted, MSRP $199

CMC Barrels are 100% manufactured in-house in Fort Worth, Texas.

For more information, go to:

  1. Long tube intake g37
  2. Range rover columbia mo
  3. Kenworth t680 mattress
  4. Hip doggie sweaters
  5. Remote control stunt car amazon

CMC Triggers Fluted Threaded Barrel for GLOCK 17 Gen3/Gen4 - Bronze TiCN



CMC Match Precision Barrels are the ultimate drop-in upgrade for Glock pistols. Machined to extremely tight tolerances from pre-hardened 416R stainless steel, selected for corrosion resistance and high tensile strength.

While undergoing strict quality control, these barrels are closely inspected to ensure you receive an ultra-precise barrel with enhanced slide fit and lock up. Barrels are 6 groove cut rifled with a 1:10 RH twist rate, double honed to produce the smoothest bore possible with a max roughness average of 12.

These user-friendly drop-in barrels do not require a gunsmith for assembly.

  • 1/2x28 RH thread pitch
  • Bead blasted to a satin finish prior to plating
  • Bronze TiCN
  • 416R stainless steel barrel
  • Hexagonal boron nitride bore and chamber
  • Chambered in 9mm Luger with a 1:10 twist rate
  • Straight fluted
  • Made in Texas
  • 100% Manufacturers Lifetime Warranty!
See More


Barrel CoatingPhysical Vapor Deposition - TiCN Bronze
Barrel LiningHexagonal Boron Nitride - hBN
Barrel Material416R Stainless Steel

WARNING: This Product can expose you to chemicals which is known to state of california to cause Cancer and Reproductive Harm. For more information, see

Gucci glock Gucci glock Gucci glock

by Gary -

For mechanical function and plating finish this barrel is a 5 star, cycled 640 rounds through it with only one failure to feed and that was due to a damaged cartridge that wouldnt feed in any of my 9mms.
<br>Plating is consistant and the color is great.
<br>Gucci glock without the 300+ ZeV price tag. However, if you're gonna buy this barrel and dont have a suppressor or muzzle device waiting for it order a real thread protector. The one that came with mine is plastic, which is why I dinged it to 4 stars. For a $210 barrel you really should be recieving a metal thread protector.

An internal error has occurred
Update on my CMC trigger Glock 17 barrel

9mm Glock Barrel Guide

It’s no secret that Glock pistols have been turned into the hot rods of the firearms world. Just like souped up cars, they are routinely modified for improved function and enhanced form by shooters, craftsmen and artists alike. One category of aftermarket firearm parts that has skyrocketed in recent years in terms of selection and demand due to this movement is that of upgrade barrels for Glocks, especially of the 9mm variety. 

After you get a Glock’s slide milled and its frame re-contoured and the entire pistol coated, what do you do next? You drop in an upgraded barrel of course. Barrels not only dictate how accurate your pistol is, but can contribute greatly to its weight as well as aesthetic too.

We scoured the aftermarket land for samples of barrels to present to our custom-gun loving audience. On display here are only single samples of Glock-compatible barrels. If you see ones that you like, we encourage you to visit the manufacturer’s website to see what else they may offer that can also pique your interest. Now without further ado, let’s dive into the guide.

True Precision – #1
Glock 19 Non-Threaded
Finish: Rose-TiCN
Other Available Finishes: 14 more
Highlights: Drop-in fitment, advanced proprietary broach cut design specifically engineered for increased accuracy potential.
MSRP: $190

CR Precision – #2
Drop-In G19 Non-Threaded Barrel
Finish: TiN
Highlights: This drop-in replacement barrel features dimpling and a durable TiN coating.
MSRP: $235

Wilson Combat – #3
Match Grade Barrel, Full-Fit 9mm For Glock 19
Finish: Stainless
Highlights: Fits: Gen 3, Gen 4, Gen 5 G19’s, it is made of 416R stainless and oversized in all dimensions. When properly fitted, WC claims it will shoot groups rivaling a 1911 handgun with a match grade with a fully fitted barrel. Designed for professional gunsmith installation, this barrel will not drop in to any firearm without significant fitting.
MSRP: $165

Bear Creek Arsenal – #4
BCA Glock 19 9mm Replacement Barrel (Threaded/Unbranded)
Finish Shown: Black Nitride Finish
Highlights: This is a drop-in replacement barrel that will fit Glock 19 models Gen 1 through 4.
MSRP: $109

Killer Innovations – #5
Velocity Glock Barrel (Glock 19, Threaded)
Finish Shown: TiN
Other Available Finishes: Black Nitride, MDC (Gray)
Highlights: Barrel is machined with an 11° target crown for greater accuracy and coated with high quality finishes, ensuring accuracy and reliability
MSRP: $190-211

Tactical Kinetics – #6
G19 Threaded Barrel – Engraved
Finish Shown: Black Nitride
Highlights: This button rifled match grade Tactical Kinetics G19 Gen 5 threaded pistol barrel is engraved with the Tactical Kinetics TK logo.
MSRP: $105

Next Level Armament – #7
Glock 19 Barrel Two-Tone Threaded
Finish Shown: Nitride, silver dash, clear Cerakote finish
Highlights: This Glock 19 barrel starts with a 416 Stainless Steel blank that is finished in Nitride, which is then machined in your choice of either a dash or spiral design. Available in a non-threaded version as well.
MSRP: $150

Wheaton Arms – #8
Glock 19 Copper Finish Threaded Match Grade Barrel
Finish Shown: Copper
Highlights: Fits Glock 19 Gen 5, MOS & 19X models. Its fully supported chamber reduced the risk of case head separation and its polished feed ramp increases reliability. Its oversized locking lugs maximize accuracy and reduce wear to slide.
MSRP: $220

Griffin Armament – #9
Glock 19 Gen 3/4 Barrel 1/2×28 Threaded With Micro Carry Comp
Finish Shown: Black Nitride
Highlights: Billet machined from 416R stainless steel for ultimate drop-in match performance. Designed with concealed carry users in mind, comes with GA’s patent pending Micro Carry Comp, an impressive performance add on.
MSRP: $196

Fortis Manufacturing – #10
Glock Match Grade Barrel – 19 With Lone Rifling Threaded
Finish Shown: MDC Coating (Grey)
Other Available Finishes: Black Nitride, TiN (Gold)
Highlights: Single point cut Lone Rifling for precise concentricity and accuracy, made of 416-R steel, 11° target crown, comes with threaded barrel protector. Compatible with Glock Gens 1-5 as well as Glock X
MSRP: $210-220

Surefire – #11
Zev Drop-In Gun Barrels For Glock 19
Finish Shown: Black DLC
Other Available Finishes: Burnt Bronze
Highlights: Manufactured exclusively for SureFire by ZEV Technologies, this match-grade, drop-in barrel features extremely tight tolerances for superb accuracy. Because they’re produced for SF, the thread specs and profile of these barrels are perfect for attaching SF’s Ryder 9mm suppressor.
MSRP: $275

Faxon Firearms – #12
G19 Barrel, Flame Fluted, Threaded, 416-R, Nitride, Match Series
Finish Shown: Chameleon (Rainbow)
Other Available Finishes: Black Nitride, TiN (Gold)
Highlights: Compatible with Glock 19 Gens 1 through 5, this drop-in barrel features tight tolerances for better fitment and lock-up. It features a 9mm SAAMI Chamber for increased accuracy and boring reliability.
MSRP: $209

Shadow Systems – #13
Match Barrel – Threaded Fluted – Glock G19
Finish Shown: Bronze TiCN
Other Available Finishes: Black DLC
Highlights: Engineered to easily drop-in yet fit more tightly in critical lock up areas for improved accuracy. Flutes reduce the weight of the barrel while adding an exit for dirt & debris in the slide. Made of 416-R Stainless, its thread protector is included.
MSRP: $249

Brownells – #14
Match Grade Barrel Glock 19 Gen 1-5 9mm Threaded
Finish Shown: Black Nitride
Highlights: Brownells Compact 9mm Glock 19 barrels are designed to drop into any Glock 19 pistol from Gen 1 through 4. Constructed from 416-R stainless-steel bar stock and features conventional land-and-groove rifling instead of the polygonal rifling found on factory Glock pistol barrels.
MSRP: $137

Battle Arms Development – #15
Battlearms One:1 Barrel Fits Glock 19
Finish Shown: Stainless
Other Available Finishes: Melonite QPQ Black Nitride
Highlights: Available in both threaded and non-threaded versions, the One:1 utilizes a revolutionary machining process where one machine comprehensively machines the entire barrel from beginning to end. Fits Glock 19 Gen 1 through 5 including 19X.
MSRP: $200-250

CMC Triggers – #16
Glock Barrel 75518 Glock 34 Fluted Non-Threaded
Finish Shown: Bronze TiCN
Other Available Finishes: Stainless, Black DLC
Highlights: CMC’s barrels are 6 groove, cut rifled, double honed and are made with SAAMI Match Grade specification chambers. This straight fluted direct drop-in barrel does not require gunsmith assembly. Accuracy made easy.
MSRP: $199

AIM Surplus – #17
Glock 19 Compatible 9mm Barrel
Finish Shown: TiN
Other Available Finishes: Stainless
Highlights: AIM’s Glock 19 compatible stainless steel drop-in barrel is coated in TiN with 1/2×28 threads. No gunsmithing required.
MSRP: $100

Zaffiri Precision – #18
G19 Barrel – Threadless (OEM)
Finish Shown: Tropical PVD
Other Available Finishes: TiN, Stainless, Black Nitride
Highlights: This match-grade barrel is an easy drop-in performance upgrade for your pistol. Made of 416-R Stainless Steel with pulled broached rifling and polished feed ramp. OEM stands for factory Glock length.
MSRP: $169

Suarez International – #19
Faceshooter G-43/43x Threaded Barrel
Finish Shown: Melonite
Highlights: A perfect drop-in replacement barrel for Glock 43’s, the Faceshooter is threaded for suppressor attachment and is fully supported for SAAMI specification match chambers. The barrel allows for significant increases in accuracy with no loss in reliability.
MSRP: $160

Lone Wolf Distributors – #20
PVD Coated LWD Barrel M/19 Threaded
Finish Shown: Frost Bite PVD
Other Available Finishes: 8 more
Highlights: Available for Glock 19 Gens 1 through 5 and Glock 17 Gens 1 through 4, LWD’s barrels are ready to drop-in without any further gunsmitthing. Available in nine different colored finishes, LWD barrels allows you plenty of choices for your pistol’s customization.
MSRP: $160

Grey Ghost Precision – #21
GGP Glock 19 Match Grade Barrel
Finish Shown: Black Nitride
Other Available Finishes: Uncoated
Highlights: Available threaded and non-threaded as well as uncoated or coated in black nitride, this match grade drop-in barrel is made of 416-R stainless steel. It is machined for a final dimension of +/- 0.003” for consistent accuracy and features a proprietary twist rate.
MSRP: $180-190

KAB Defense – #22
Barrels For 9mm Glocks
Finish Shown: TiN (Gold)
Other Available Finishes: CrN (Silver), Black DLC
Highlights: Available to fit Glock 17, 19, 19X, and 34 Gens 1 through 4 and Glock 19 and 19X Gen 5, KAB Defense’s barrels are machined in-house from 416R stainless steel hardened to 38-42 HRC. They are available with or without threading.
MSRP: $225

Alpha Wolf (By Lone Wolf Distributors) – #23
Alpha Wolf Barrel For M/17 9mm Stock Length
Finish Shown: SBN
Highlights: Alpha Wolf barrels fit Glock generations 1-4 and are designed to fire lead, plated, or jacketed ammunition. Made of 416 stainless steel and button rifled then finished with a three stage honed bore.
MSRP: $140

Double Diamond – #24
Premium Replacement Barrel
Finish Shown: Stainless
Other Available Finishes: Black, Chameleon, Gold
Highlights: A high quality replacement barrel with a touch of style for your Glock. Available for Glock models 17, 19, 22, 23 and 34, does not fit Gen 5 models, and the G34 Barrels only work in Gen 1-3 Glocks.
MSRP: $170-280

Zev Technologies – #25
V2 Match Barrel G17 Gen5
Finish Shown: Bronze
Other Available Finishes: Black DLC
Highlights: ZEV’s V2 Match Barrels have been redesigned for improved performance and Gen5 compatibility. Available threaded or not, new features include a recessed target crown, a new match chamber, and a stylized barrel hood with caliber and model engravings and a loaded chamber indicator.
MSRP: $300

Alpha Shooting Sports – #26
Alpha 9mm Match Grade Barrel For G17
Finish Shown: TiN
Other Available Finishes: Stainless, Black DLC
Highlights: Titanium nitride (TiN) plated for increased wear resistance and an attractive gold finish. This 4.5” length barrel is compatible with Gen 3 and 4 Gen G17’s. Manufactured from 416-R stainless steel bar-stock. Broach cut rifled in 1:16LH twist for accuracy and the ability to shoot non-jacketed lead projectiles.
MSRP: $230

Lantac – #27
Glock 9ine G17 Threaded Upgrade Barrel
Finish Shown: Stainless
Other Available Finishes: Bronze, Black
Highlights: If you’re looking for a substantial upgrade drop-in barrel for your Gen 3 and 4 Glock 17 and 19 pistols, this is it. This match grade barrel is precision machined from certified pre-hardened DFARS compliant 416-R stainless steel to extremely tight tolerances.
MSRP: $306

Agency Arms – #28
Premier Line Match Grade Drop-In Barrel
Finish Shown: TiN
Other Available Finishes: Stainless, Black DLC
Highlights: Sporting distinctive octagonal fluting, one look at the Agency Arms Premier Line barrel and you already know it’s unlike all others. Available for different Glock models including Glock 17 Gens 1 though 4, in threaded and not threaded versions.
MSRP: $310-320

Strike Industries – #29
ARK G17 Barrel for Glock
Finish Shown: Black Nitride
Highlights: Strike Industries ARK G17 is a spiral-fluted barrel that reduces weight without sacrificing accuracy or durability. Crafted from pre-hardened 416 stainless steel, the barrel is corrosion resistant and boasts high tensile strength.
MSRP: $180

Text by Jerry Tsai and images by Jeff Chen


Barrel review cmc

CMC Barrels are precision made from premium components with input from law enforcement, military, and civilian shooters to bring you the best of the best in AR-15 barrel performance. Each barrel is rigorously inspected at multiple stages of the manufacturing process with precision tools that check straightness, uniformity, and tolerances down to .0001” or the barrel won’t ship. This 16” barrel is machined from 4150 Chrome Moly Vanadium Steel, black Nitride coated, and features a mid-length gas system for the ultimate reliability and durability. It is chambered in .223 Wylde which allows you take full advantage of consistently accurate .223 Remington loads while still being able to reliably and safely shoot affordable 5.56 ammunition. The button rifled lands and grooves with a 1:7 twist rate and 11° target crown ensure your heavier target loads are properly stabilized while still being usable with lighter bullets.

  • 16” barrel chambered for .223 Wylde
  • Mid-length gas system
  • SOCOM profile with .750” gas block shelf
  • 4150 Chrome Moly Vanadium Steel with Nitride finish
  • 1:7 button rifling with .0001” tolerances
  • Air gauge tested
  • 11° target crown with 1/2x28 threads
  • Compatible with .223 and 5.56 ammunition
  • Dimpled gas block shelf for alignment
  • M4 feed ramps for reliable feeding
  • CMC lifetime warranty
  • Weight: 2 lbs.

This .223 Wylde barrel is based on the SOCOM profile and only weighs 2 lbs. with a .750” gas block shelf for use with the widest variety of gas blocks. Additionally, the bottom of the gas block shelf is dimpled for easy gas block alignment and a more secure install. It is threaded 1/2x28 for .223 muzzle devices. If you are looking to build a new rifle, you can’t go wrong with CMC AR-15 barrels.

With roots in aerospace manufacturing, CMC is perhaps best known as the producer of the original drop-in precision trigger for the AR-15/10 platform. CMC Triggers are dedicated to crafting the finest parts and accessories for law enforcement, military, and civilian use.
CMC Buffer Kit and Lower Parts Kit! First Look

The girl was numb from the surprise of the attack. Panties still covered most of her slit, and she was not ready for the invasion, and therefore the dog's attempt to drive in a member right now, scared her. The dog made a few more thrusts with the same result.

You will also like:

They went into the living room, which had some furniture. There was only a cozy sofa, a coffee table, a TV and a small headset. Without wasting time, the guys offered the birthday girl to sit on the couch, took out rum and cola and quickly mixed.

386 387 388 389 390